T-51512D121J-FW_A_AB

m o .c Technical Specification LCD Module U 4 t e e h T-51512D121J-FW-A-AB S a at .D w w w Type No. First Edition Jun 18, 2003 Final Revision ****** Approved by (Quality Assurance Division) No. -1 2 3 4 5 6 7 8 9 10 11 ---- m o .c U 4 t e e h S a t a .D w w w Item Page 1 2 3 3 6 8 CONTENTS OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM 11 12 14 16 17 18 21 MECHANICAL SPECIFICATION OPTICAL CHARACTERISTICS RELIABILITY TEST CONDITION INSPECTION STANDARDS HANDLING PRECAUTIONS FOR TFT-LCD MODULE PACKAGING SPECIFICATION PRODUCT NUMBER LABELING FORMS LAMP UNIT FOR 12.1” SVGA Checked by (ACI Engineering Division) Prepared by (Module Administration Group) T-51512D121J-FW-A-AB (AB) No. 2003-0101 OPTREX CORPORATION m o 25 .c U 27 4 t e e h S a at .D w w w Page 1/32 1. OVERVIEW T-51512D121J-FW-A-AB is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit digital data, 800 × 600, 260 K-color images are displayed on the 12.1” diagonal screen. Input power voltage is single 3.3V or 5.0V for LCD driving. Both 3.3 V-CMOS and 5.0 VCMOS level voltage are acceptable for logic input voltage. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM Display Area (mm) Number of Dots Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of Co...