GX680

Stabilizing bar w w a t a D . w Fuji GX680 Stitching Back A d a p t e r m o Please .c read these instructions before using this adapter. U Group Fuji GX 680 Stitching Adapter enables the The Kapture 4 t of 2 images in landscape or portrait orientation. A e stitching e center detent for single image capture is also provided. h S When stitching, you must first pull the detent release knob. After the sliding plate starts to move you may release it. It will automatically drop into the selected detent. Make your first capture and then pull the release knob again and slide the adapter plate to the opposite side until it locks in place. The overlap selector rotates 180 degrees with red dots on one side and white dots on the other. These dots correspond with the red or white dots on the adapter plate. If you are using a 4x4 or 5x4 chip select the red dot. When using a 2x3 chip select the white dot for portrait shots and the red dot for landscape imaging. Landscape stitching w w .D w t a S a e h t e U 4 .c m o Center lock Mounting the Fuji stitching adapter The stabilizing bar must be retracted before attaching or rotating this adapter. Simply pull both ends of the stabilizing bar back fully. Next, align the rotating back as shown in the photo above. Rotate the stitching adapter to the desired orientation. Push both ends of the stabilizing bar toward the Fuji camera body until it is snug. When the detent release knob is at the 12 o’clock position you are in the landsc...