SOT-23 Single-Supply Centigrade Temperature Sensor
LM50 SOT-23 Single-Supply Centigrade Temperature Sensor
July 1999
LM50 SOT-23 Single-Supply Centigrade Temperature Sen...
Description
LM50 SOT-23 Single-Supply Centigrade Temperature Sensor
July 1999
LM50 SOT-23 Single-Supply Centigrade Temperature Sensor
General Description
The LM50 is a precision integrated-circuit temperature sensor that can sense a −40˚C to +125˚C temperature range using a single positive supply. The LM50’s output voltage is linearly proportional to Celsius (Centigrade) temperature (+10 mV/˚C) and has a DC offset of +500 mV. The offset allows reading negative temperatures without the need for a negative supply. The ideal output voltage of the LM50 ranges from +100 mV to +1.75V for a −40˚C to +125˚C temperature range. The LM50 does not require any external calibration or trimming to provide accuracies of ± 3˚C at room temperature and ± 4˚C over the full −40˚C to +125˚C temperature range. Trimming and calibration of the LM50 at the wafer level assure low cost and high accuracy. The LM50’s linear output, +500 mV offset, and factory calibration simplify circuitry required in a single supply environment where reading negative temperatures is required. Because the LM50’s quiescent current is less than 130 µA, self-heating is limited to a very low 0.2˚C in still air.
Applications
n n n n n n n n n Computers Disk Drives Battery Management Automotive FAX Machines Printers Portable Medical Instruments HVAC Power Supply Modules
Features
n n n n n n n n n n Calibrated directly in degree Celsius (Centigrade) Linear + 10.0 mV/˚C scale factor ± 2˚C accuracy guaranteed at +25˚C Specified for full −...
Similar Datasheet