MX29LV017A

FEATURES w w Extended single - supply voltage range 2.7V to 3.6V 2,097,152 x 8 Single power supply operation - 3.0V only operation for read, erase and program operation Fast access time: 70/90ns Low power consumption - 30mA maximum active current - 0.2uA typical standby current Command register architecture - Byte Programming (9us typical) - Sector Erase (Sector structure 64K-Byte x32) Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address Erase suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase. Status Reply w .D at h S a t e e 4U . m o c PRELIMINARY MX29LV017A 16M-BIT [2Mx8] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY - Data polling & Toggle bit for detection of program and erase operation completion. Ready/Busy pin (RY/BY) - Provides a hardware method of detecting program or erase operation completion. Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors. CFI (Common Flash Interface) compliant - Flash device parameters stored on the device and provide the host system to access 100,000 minimum erase/program cycles Latch-up protected to 100mA from -1V to VCC+1V Low VCC write inhibit is equ...