Single-Port 10/100 Mbps PHY Transceiver
w
w
w
.D
a
S a t
. U ® Intel 4 LXT972M Single-Port 10/100 Mbps t e Transceiver PHY e h
Datasheet
The Intel® LXT972...
Description
w
w
w
.D
a
S a t
. U ® Intel 4 LXT972M Single-Port 10/100 Mbps t e Transceiver PHY e h
Datasheet
The Intel® LXT972M Single-Port 10/100 Mbps PHY Transceiver is an IEEE compliant Fast Ethernet PHY Transceiver that directly supports both 100BASE-TX and 10BASE-T applications. It provides a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MACs). Both full and half-duplex operation at 10 Mbps and 100 Mbps is supported. Operation mode can be set to auto-negotiation, parallel detection, or manual control. The device is powered from a single 3.3V power supply.
m o c
Applications
■ ■ ■
Combination 10BASE-T/100BASE-TX Network Interface Cards (NICs) Wireless access points Network printers
■ ■
10/100 Personal Computer Memory Card International Association (PCMCIA) cards Cable Modems and Set-Top Boxes
Product Features
■ ■ ■ ■ ■
3.3V Operation IEEE 802.3-compliant 10BASE-T or 100BASE-TX with integrated filters Auto-negotiation and parallel detection MII interface with extended register capability Robust baseline wander correction
■
RESET_L ADDR[1:0] MDIO MDC
TX_EN
TXD[3:0]
RX P CS
w
w
TX_CLK
LED/CFG[3:1]
w
TX PCS
.D
Collision Detect
Management / Mode Select Logic
t a
S a
Auto Negotiation Clock Generator
e h
■ ■ ■ ■
Carrier Sense Multiple Access / Collision Detection (CSMA/CD) or full-duplex operation JTAG boundary scan MDIO serial port or hardware pin configurable Integrated, programmable LED drivers 48-pin Low-profile Q...
Similar Datasheet