DatasheetsPDF.com

TM162JBAG Dataheets PDF



Part Number TM162JBAG
Manufacturers TIANMA
Logo TIANMA
Description LCD_Module
Datasheet TM162JBAG DatasheetTM162JBAG Datasheet (PDF)

w w w t e e h SPECIFICATION FOR LCD MODULE S a t a D . Model No. TM162JBAG 4U . m o c Prepared by: Checked by : Verified by : Approved by: w w w .D t a S a e h Date: Date: t e U 4 .c m o Date: Date: h TIANMA MICROELECTRONICS CO., LTD w w .D a S a t t e e 4U . m o c w Ver 1.0 REVISION RECORD Date Ver. Ref. Page. Revision No. Revision Item 1/22 Rev. 1.0 1. General Specifications: 1.1 Display type: STN 1.2 Display color*: Display color: Blue-Black Background: Yellow-.

  TM162JBAG   TM162JBAG


Document
w w w t e e h SPECIFICATION FOR LCD MODULE S a t a D . Model No. TM162JBAG 4U . m o c Prepared by: Checked by : Verified by : Approved by: w w w .D t a S a e h Date: Date: t e U 4 .c m o Date: Date: h TIANMA MICROELECTRONICS CO., LTD w w .D a S a t t e e 4U . m o c w Ver 1.0 REVISION RECORD Date Ver. Ref. Page. Revision No. Revision Item 1/22 Rev. 1.0 1. General Specifications: 1.1 Display type: STN 1.2 Display color*: Display color: Blue-Black Background: Yellow-Green 1.3 Polarizer mode: Reflective/Positive 1.4 Viewing Angle: 6:00 1.5 Driving Method: 1/16 Duty 1/5 Bias 1.6 LCD Operating Voltage: 2.4 - 5.5V 1.7 Logic Voltage: 5V 1.8 Without Backlight 1.9 Controller: S6A0032X01-B0CY 1.10 Display Fonts: 5 ¡Á 8 dots (1 Character) 1.11 Data Transfer: 8 Bits Parallel 1.12 Operating Temperature: 0----+50¡æ Storage Temperature: -20----+60¡æ 1.13 Outline Dimensions: Refer to outline drawing on next page 1.14 Dot Matrix: 16 Characters X 2 Lines 1.15 Dot Size: 0.55X0.60(mm) 1.16 Dot Pitch: 0.60X0.65(mm) 1.17 Weight: 20g (Approx) * Color tone is slightly changed by temperature and driving voltage. 2/23 Ver 1.0 3. LCD Module Part Numbering System TM162J B A G G: COG MOUDLE NONE: 6 O'CLOCK VIEWING DIRECTION BACKLIGHT TYPE A: REFLECTIVE, NO BACKLIGHT LCD TYPE B: Y-G STN/POSITIVE MODULE SERIES MODULE TYPE 3 DIGITS INDICATING 16 CHARACTERS X 2 LINES T: TIANMA M: MODULE 4/23 Ver 1.0 4. Circuit Block Diagram 5/23 Ver 1.0 5. Absolute Maximum Ratings Item Power Supply Voltage LCD Driving Voltage Operating Temperature Range Storage Temperature Range Symbol VDD£- VSS VLCD Min. -0.3 -0.3 Max. 7.0 V 13.0 Unit Remark TOP 0 +50 ¡æ No Condensation TST -20 +60 6/23 Ver 1.0 6. Electrical Specifications and Instruction Code 6.1 Electrical characteristics Item Symbol Supply Voltage (Logic) Supply Voltage (LCD Drive) High £¨ Low £¨ VDD£- VSS Min. Typ. Max. Unit - 5.0 - V VLCD VIH VDD=5.0£© VIL VDD=5.0£© IDD £¨ VDD -VSS =5.0£© - 4.5 - V Input Signal Voltage 0.7VDD - VDD+0.3 V -0.3 - 0.2VDD V Supply current (Logic) - - 500 uA 7/23 6.2 Interface Signals Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Symbol VSS VDD VO RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 Level 0V 5.0V 4.5V H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L H/L Description Ground Power supply voltage Power supply voltage for LCD Selects registers (H: Data, L: Instruction) Selects read or write (H: Read, L: Write) Read/write enable signal Data bit0 Data bit1 Data bit2 Data bit3 Data bit4 Data bit5 Data bit6 Data bit7 8/23 Ver 1.0 6.3 Interface Timing Chart AC Characteristics(VDD=2.4V~5.5V,Ta=-30~+85℃) 6800-series MPU Interface & Write Instruction AC Characteristics (6800-series Write Instruction) Condition Characteristic E cycle time Pulse rise / fall time E pulse width high VDD = 2.4V to 3.6V, o Ta = -30 to +85 C E pulse width low RS and CSB setup time RS and CSB hold time DB setup time DB hold time E cycle time Pulse rise / fall time E pulse width high VDD = 3.6V to 5.5V, o Ta = -30 to +85 C E pulse width low RS and CSB setup time RS and CSB hold time DB setup time DB hold time Symbol tC tR, tF tWH tWL tSU1 tH1 tSU2 tH2 tC tR, tF tWH tWL tSU1 tH1 tSU2 tH2 Min. 650 450 150 60 30 100 50 350 250 100 40 10 40 10 Typ. Max. 25 25 ns ns Unit RS, CSB tSU1 RW_WR tWH tF E_RD tR DB0 to DB7 tC Write Bus Mode Timing (6800-series MPU Interface) tSU2 tH2 tWL tH1 9/23 Ver 1.0 6800-series MPU Interface & Read Instruction AC Characteristics (6800-series Read Instruction) Condition Characteristic E cycle time Pulse rise / fall time E pulse width high VDD = 2.4V to 3.6V, o Ta = -30 to +85 C E pulse width low RS and CSB setup time RS and CSB hold time DB output delay time DB output hold time E cycle time Pulse rise / fall time E pulse width high VDD = 3.6V to 5.5V, o Ta = -30 to +85 C E pulse width low RS and CSB setup time RS and CSB hold time DB output delay time DB output hold time Symbol tC tR,tF tWH tWL tSU tH tD tDH tC tR,tF tWH tWL tSU tH tD tDH Min. 650 450 150 60 30 20 350 250 100 40 10 10 Typ. Max. 25 360 25 120 ns ns Unit RS, CSB tSU RW_WR tWH E_RD tR DB0 toDB7 tC Read Bus Mode Timing (6800-series MPU Interface) tD tDH tF t WL tH 10/23 Ver 1.0 6.4 Instruction Code INSTRUCTION DESCRIPTION Instruction Table Instruction *Clear display RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 0 0 0 0 0 0 0 0 0 1 Description Write "20H" to DDRAM and set DDRAM address to "00H" from AC DDRAM address is set to 00h from AC and the cursor returns to 00h position. The contents of DDRAM are not changed. Assign cursor moving direction and enable the shift of entire display Set display (D), cursor (C), and blinking of cursor (B) ON / OFF control Set cursor moving and display shift control bit, and the direction, without changing of DDRAM data Set interface data length (DL: 4-bit / 8-bit) instruction Set CGRAM address in address counter. Set DDRAM address in address counter. Whether in internal operation or not can be known by reading BF,.


TM162JAAUG TM162JBAG TM162JBC6


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)