EX-1030S

Mag Co m ADSL Transformer EX-1030S Features 1>.Designed for use with ADI'S AD20MSP910 IC Chip 2>.Designed to meet Supplementary Insulation Requirements of IEC950 for 250 VAC Working Voltage 3>.Good Total Harmonic Distortion Characteristics Optimized Design for Size and Performance Customization Available 4>.Available in Tape and Reel o 5>.232 C Peak infrared reflow temperature rating 6>.Cross reference to Pulse B2032 1 .522 13,25MAX .485 12,32 MAX .005/0,13 10 SURFACES 10 X .028 ± .002 0,71 ± 0,05 .695 17,65 MAX .605 15,37 .100 2,54 .394 10,00 10 X .051 ± .002 1,30 ± 0,05 .394 10,00 .098 2,50 Ma g.C om .530 13,46 MAX EX-1030 XXXX HK .098 2,50 Schematic A PRI 3 Line 2 D 4 10 Specifications Designed to reflect 100 ohms on the PRI with 100 ohms on the SEC D.C. Resistance 20oC : (1-3): 1.10 ohms + _10% (2-4): 1.50ohms+ _10% (10-8): 1.29ohms+ _10% (9-7): 1.29ohms+ _10% Longitudinal Balance: 40 dB min., @25kHz - 1.1 MHz Frequency Response: + _1.0 dB , 30 kHz - 1.1 MHz Insertion Loss: 0.5 dB max. @ 100 kHz Dielectric Test: 1875 VAC 0.5mA 1sec , PRI - SEC Inductance: 5.0 mH + _5%, 10 kHz, 1.0 VAC, 1-4(tie 2+3), Ls Leakage Inductance: 18 uH max, 100 kHz, 100 mVAC, 1-4(tie 2+3, 8+9, 7+10), Ls THD(Linearity) : -80dB @30KHZ,-60dB @300KHZ Turns Ratio: (10-8):(9-7) = 1:1 + _1% (10-7):(1-4) = 1:1, tie (2+3, 8+9), + _1% B C 8 SEC 9 Device 7 Scale:Do not scale DWG Unit :inch/mm DWG BY : CHK BY : Appro. BY : Unspecified tolerance .x +/.xxx+/-.010/0.25 Title Unisen P/N Part NO. D...