Document
DATA SHEET
AC05DSMA,AC05FSMA
5 A RESIN INSULATION TYPE TRIAC
THYRISTORS
DESCRIPTION
The AC05DSMA and AC05FSMA are resin insulation type TRIACs with an effective current of 5 A (TC = 99°C). These products are covered with resin mold on the entire case and are electrically insulated with electrodes, giving them a
17 ±0.2
PACKAGE DRAWING (Unit: mm)
10.5 MAX. 7 ±0.2 4.7 MAX.
φ 3.2 ±0.2
5 ±0.1
3.0 MAX.
2.8 ±0.2
considerable advantage over conventional TRIACs when mounting on a heatsink board or performing high-density mounting. These products features ratings and electrical characteristics equal to TO-220AB package TRIAC and a high reliability design.
12 ±0.2
1
2 3
*
FEATURES
• Insulation type TRIAC fully covered with resin on the entire case other than electrode leads • Insulation voltage and conduction equal to conventional mica and polyester film • Can be replaced with TO-220AB package • High allowable on-current when using a single unit
0.8 ±0.1 2.54 TYP.
1.3 ±0.2 1.5 ±0.2 2.54 TYP.
13.5 MIN.
5 ±0.2
0.5 ±0.1
2.5 ±0.1
TRIAC 1: T1 2: T2 3: Gate
APPLICATIONS
*: TC test bench-mark
Standard weight: 2 g
Non-contact switches of motor speed control, heater temperature control, lamp light control
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. D15293EJ4V0DS00 (4th edition) Date Published June 2004 NS CP(K) Printed in Japan
The mark
shows major revised points.
2002
AC05DSMA,AC05FSMA
MAXIMUM RATINGS
Parameter Non-repetitive Peak Off-state Voltage Repetitive Peak Off-state Voltage Effective On-state Current Surge On-state Current Symbol VDSM VDRM IT(RMS) ITSM AC05DSMA 500 400 5 (TC = 99°C) 50 (50 Hz 1 cycle) 55 (60 Hz 1 cycle) Fusing Current Critical Rate Rise of On-state Current Peak Gate Power Dissipation Average Gate Power Dissipation Peak Gate Current Junction Temperature Storage Temperature AC05FSMA 700 600 Unit V V A A Remarks − − Refer to Figure 11 and 12. Refer to Figure 2.
∫ iT2dt
dIT/dt PGM PG(AV) IGM Tj Tstg
10 (1 ms ≤ t ≤ 10 ms) 50 3 (f ≥ 50 Hz, Duty ≤ 10%) 0.3 ±1.5 (f ≥ 50 Hz, Duty ≤ 10%) −40~+125 −55~+150
As A/µs W W A °C °C
2
− − − − − − −
ELECTRICAL CHARACTERISTICS (Tj = 25°C)
Parameter Repetitive Peak Off-state Current Symbol IDRM Conditions VDM = VDRM Tj = 25°C Tj = 125°C On-state Voltage Gate Trigger Current Mode I II III IV Gate Trigger Voltage Mode I II III IV Gate Non-trigger Voltage Holding Current Critical Rate Rise of Off-state Voltage Commutating Critical Rate Rise of Off-state Voltage Thermal Resistance
Note
MIN. − − −
TYP. − − − − − − − − − − − − 10 100 −
MAX. 100 1 1.8 10 − 10 10 1.5 − 1.5 1.5 − − − −
Unit
Remarks − − Refer to Figure 1. Refer to Figure 4.
µA
mA V mA
VTM IGT
ITM = 5 A VDM = 12 V, RL = 30 Ω T2+, G+ T2−,.