LT260A

Hall IC LT260A 2.9±0.2 1.9 s Applications ¡FDD ¡HDD ¡Water meter ¡Car stereo ¡Microswitch,etc. 0.4 2 3 0.4 0.95 X 4-R0.2 Hall device center line X : +0.05±0.23mm against package center Y : -0.05±0.1mm against package lead center between No.2 and No.3 terminals Z : 0.81±0.15mm from package surface Terminal connections 1.5±0.2 0.6 0.6 REG Hall device + H 0.3 1.1-0.1 0.16+0.10 -0.06 0.8 +0.2 s Absolute Maximum Ratings Parameter Supply voltage Output voltage Output current Power dissipation Operating temperature Storage temperature Soldering temperature* 1 *1 Soldering time : within 10 seconds - (Ta=25˚C) Rating 18 18 5 100 -20 to +125 -55 to +150 260 Unit V V mA mW ˚C ˚C ˚C Symbol VCC VOUT IO PD Topr Tstg Tsol (0to0.15) *No.3 terminal and the section of leads(both sides of package in X directionÅj are connected with the terminal of internal IC. Be careful in connecting other circuits. 1 : VCC 2 : VOUT 3 : Don't use. 4 : GND As for dimensions of tape-packaged products, refer to page 44 . s Operating Explanation Output voltage BRP 0 BOP +B Magnetic flux density s Electrical Characteristics Parameter Operating magnetic flux density Hysteresis breadth Operating voltage Supply current Low level output voltage Output leakage current Operating point temperature drift Symbol BOP BRP BH VCC ICC VOL IOH ∆BOP Conditions VCC=16V VOO=16V RL=10kΩ VCC=16V, B=<-10mT IO=4mA, B>=10mT VCC=16V, B=<10mT, VOO=16V VCC=16V, Ta=-20˚C to +80˚C MIN...