MSK4221

ISO 9001 CERTIFIED BY DSCC M.S.KENNEDY CORP. 75 VOLT 8 AMP MOSFET H-BRIDGE PWM MOTOR DRIVER/AMPLIFIER 4221 (315) 701-6751 4707 Dey Road Liverpool, N.Y. 13088 FEATURES: Low Cost Complete H-Bridge 8 Amp Capability, 75 Volt Maximum Rating Self-contained Smart Lowside/Highside Drive Circuitry Shoot-through Protection Isolated Case Allows Direct Heatsinking Four Quadrant Operation, Torque Control Capability Logic Level Disable Input Logic Level High Side Enable Input for Special Modulation or Function Internal Divider Reference for Threshold Voltage DESCRIPTION: The MSK 4221 is a complete H-Bridge circuit to be used for DC brushed motor control or Class D switchmode amplifiers. All of the drive/control circuitry for the lowside and highside switches are included internally. The user provides a digitally compatible PWM signal (a reference divider is provided for TTL compatability or the user provides their own to the VREF IN) for simultaneous amplitude and direction control in four quadrant mode. The internal drive circuitry will provide proper deadtime/shoot-through protection for each half-bridge. All N-channel FETs mean the best efficiency for the size, both in terms of on-resistance and switching capability. For an idle/sleep mode or for fault protection, a TTL compatible disable pin is provided so as to shut down all four transistors. The MSK4221 is constructed on a space efficient ceramic coated insulated metal substrate that can be directly connected to a heat sink. E...