MSK4300

ISO 9001 CERTIFIED BY DSCC M.S.KENNEDY CORP. 10 AMP, 75V, 3 PHASE MOSFET BRIDGE WITH INTELLIGENT INTEGRATED GATE DRIVE 4300 (315) 701-6751 4707 Dey Road Liverpool, N.Y. 13088 FEATURES: 75 Volt Motor Supply Voltage 10 Amp Output Switch Capability, All N-Channel MOSFET Output Bridge 100% Duty Cycle High Side Conduction Capable Suitable for PWM Applications from DC to 100KHz Shoot-Through/Cross Conduction Protection Undervoltage Lockout Protection Programmable Dead-Time Control Low Active Enable for Bridge Shutdown Control Isolated Package Design for High Voltage Isolation Plus Good Thermal Transfer Available with Three Lead Bend Options MIL-PRF-38534 QUALIFIED DESCRIPTION: The MSK 4300 is a 3 phase MOSFET bridge plus drivers in a convenient isolated hermetic package. The hybrid is capable of 10 amps of output current and 75 volts of DC bus voltage. It has a full line of protection features, including undervoltage lockout protection of the bias voltage, cross conduction control and a user programmable dead-time control for shoot-through elimination. In addition, the bridge may be shut down by using the EN (enable) control. The MSK 4300 provides good thermal conductivity for the MOSFETs due to the electrically isolated package design that allows direct heat sinking of the device without insulators. EQUIVALENT SCHEMATIC TYPICAL APPLICATIONS 3 Phase Brushless DC Servo Control Fin Actuator Control Gimbal Control 3 Phase AC Induction Motor Control HVAC Blower Control 1 Rev. ...