LT1910

LT1910 Protected High Side MOSFET Driver FEATURES s s s s s s s DESCRIPTIO s s s 8V to 48V Power Supply Range Protected from –15V to 60V Supply Transients Short-Circuit Protected Automatic Restart Timer Open-Collector Fault Flag Fully Enhances N-Channel MOSFET Switches Programmable Current Limit, Delay Time and Autorestart Period Voltage Limited Gate Drive Defaults to OFF State with Open Input Available in SO-8 Package The LT®1910 is a high side gate driver that allows the use of low cost N-channel power MOSFETs for high side switching applications. It contains a completely self-contained charge pump to fully enhance an N-channel MOSFET switch with no external components. When the internal drain comparator senses that the switch current has exceeded the preset level, the switch is turned off and a fault flag is asserted. The switch remains off for a period of time set by an external timing capacitor and then automatically attempts to restart. If the fault still exists, this cycle repeats until the fault is removed, thus protecting the MOSFET. The fault flag becomes inactive once the switch restarts successfully. The LT1910 has been specifically designed for harsh operating environments such as industrial, avionics and automotive applications where poor supply regulation and/or transients may be present. The device will not sustain damage from supply transients of –15V to 60V. The LT1910 is available in the SO-8 package. , LTC and LT are registered trademarks of Linear Tec...