Turbo 2 ultrafast high voltage rectifier
STTH5L06
Turbo 2 ultrafast high voltage rectifier
Datasheet - production data
K TO-220AC
K
A
K
A K
A
A K
TO-220FP...
Description
STTH5L06
Turbo 2 ultrafast high voltage rectifier
Datasheet - production data
K TO-220AC
K
A
K
A K
A
A K
TO-220FPAC
DO-201AD K
K
Description
The device is developed using ST's Turbo 2 600 V technology. It is well-suited as a boost diode, especially for use in continuous mode power factor corrections and hard switching conditions.
This device is also intended for use as a free wheeling diode in power supplies and other power switching applications.
Table 1: Device summary
Symbol
Value
IF(AV) VRRM IR (max) Tj (max) VF (typ) trr (typ)
5A 600 V 125 µA / 150 µA 175 °C 0.85 V 65 ns
KA NC
DPAK
KA NC
Features
Ultrafast switching Low reverse recovery current Reduces switching losses Low thermal resistance Insulated package: TO-220FPAC
Insulation voltage: 2000 VRMS sine ECOPACK®2 compliant component for
DPAK on demand
May 2017
DocID8371 Rev 5
This is information on a product in full production.
1/15
www.st.com
Characteristics
STTH5L06
1
Characteristics
Table 2: Absolute ratings (limiting values at 25 °C, unless otherwise specified)
Symbol
Parameter
Value Unit
VRRM Repetitive peak reverse voltage IF(RMS) Forward rms current
600
V
TO-220AC
TO-220FPAC
20
DO-201AD
A
DPAK
10
IF(AV)
Average forward current δ = 0.5, square wave
TO-220AC, DPAK DO-201AD TO-220FPAC
TC = 150 °C Tl = 50 °C TC = 135 °C
5
A
IFRM
Repetitive peak forward current
tP = 5 μs, F = 5 kHz square
65
A
IFSM
Surge non repetitive forward current
TO-220AC TO-22...
Similar Datasheet