DatasheetsPDF.com

IRKJ91 Dataheets PDF



Part Number IRKJ91
Manufacturers International Rectifier
Logo International Rectifier
Description ADD-A-pak GEN V Power Modules
Datasheet IRKJ91 DatasheetIRKJ91 Datasheet (PDF)

Bulletin I27141 rev. F 10/02 IRK.91 SERIES STANDARD DIODES Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage ADD-A-pakTM GEN V Power Modules Benefits Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 100 A Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance ob.

  IRKJ91   IRKJ91


Document
Bulletin I27141 rev. F 10/02 IRK.91 SERIES STANDARD DIODES Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage ADD-A-pakTM GEN V Power Modules Benefits Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 100 A Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. The electrical terminals are secured against axial pull-out: they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Electrical Description These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. Major Ratings and Characteristics Parameters IF(AV) @ TC IF(RMS) IFSM 2 IRK.91 100 100 157 Units A °C A A A KA2s KA2s KA2√s V o o @ 50Hz @ 60Hz 2020 2110 20.43 18.65 204.3 400 to 1600 - 40 to 150 - 40 to150 I t @ 50Hz @ 60Hz I 2√ t VRRM range TJ TSTG C C www.irf.com 1 IRK.91 Series Bulletin I27141 rev. F 10/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 04 06 08 IRK.91 10 12 14 16 VRRM , maximum repetitive peak reverse voltage V 400 600 800 1000 1200 1400 1600 VRSM , maximum nonrepetitive peak rev. voltage V 500 700 900 1100 1300 1500 1700 IRRM max. @ TJ = 150°C mA 10 Forward Conduction Parameter I F(AV) I F(AV) Max. average forward current @ Case temperature Max. average forward current @ Case temperature I F(RMS) Max. RMS forward current I FSM Max. peak, one-cycle forward, non-repetitive surge current IRK.91 100 100 90 107 157 2020 2110 1700 1780 Units Conditions A °C A °C A DC @ 90°C case temperarure t = 10ms A t = 8.3ms t = 10ms t = 8.3ms t = 10ms KA2s t = 8.3ms t = 10ms t = 8.3ms KA √ s 2 180° conduction, half sine wave 180° conduction, half sine wave No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. I t 2 Maximum I t for fusing 2 20.43 18.65 14.45 13.19 I √t 2 Maximum I Öt for fusing 2 204.3 0.79 t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. (I > π x IF(AV)),TJ = TJ max. (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 rf2 V FM Low level value of forward slope resistance High level value of forward slope resistance Max. forward voltage drop V 0.87 1.78 mΩ 1.57 1.45 V (I > π x IF(AV)),TJ = TJ max. IFM = p x IF(AV), TJ = 25°C, tp = 400µs square wave Blocking Parameter IRRM VINS Max. peak reverse leakage current RMS isolation voltage 3500 (1 sec) V 50 Hz, circuit to base, all terminals shorted IRK.91 10 Units Conditions mA TJ = 150oC 2 www.irf.com IRK.91 Series Bulletin I27141 rev. F 10/02 Thermal and Mechanical Specifications Parameter TJ Tstg RthJC RthCS T Max. junction operating temperature range Storage temperature range Max. thermal resistance, junction to case Typical thermal resistance, case to heatsink Mounting torque ±10% to heatsink busbar wt Approximate weight Case style IRK.91 -40 to 150 -40 to 150 0.35 0.1 5 4 110 (4) TO-240AA Units °C Conditions Per junction, DC operation K/W Nm g (oz) JEDEC Mounting surface flat, smooth and greased A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound ∆R Conduction (per Junction) (The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC) Devices 180o IRK.91 0.052 Sine half wave conduction 120o 0.064 90o 0.082 60o 0.112 30o 0.164 180o 0.043 Rect. wave conduction 120o 0.069 90o 0.088 60o 0.115 30o 0.165 Units °C/W Ordering Information Table Device Code IRK 1 D 2 91 3 / 16 4 A 5 1 2 3 4 5 - Module type Circuit configuration (See Circuit Configuration Table) Current code Voltage code (See Voltage Ratings Table) A: Gen V www.irf.com 3 IRK.91 Series Bulletin I27141 rev. F 10/02 Outline Table Dimensions are in millimeters and [inches] Circuit Configuration Table IRKD (1) IRKE IRKJ (1) IRKC (1) ~ - + (2) D = 2 diodes in series + (2) (2) + + (2) - E = Single diode J = 2 diodes/common anode C = 2 diodes/common cathode (3) (3) + (3) (3) NOTE: To order the.


TC5050P IRKJ91 IRKJ56


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)