DatasheetsPDF.com

MB54501 Dataheets PDF



Part Number MB54501
Manufacturers Fujitsu Media Devices
Logo Fujitsu Media Devices
Description FRONT-END LSI
Datasheet MB54501 DatasheetMB54501 Datasheet (PDF)

FUJITSU SEMICONDUCTOR DATA SHEET DS04-23505-1E ASSP CMOS FRONT-END LSI MB54501 s DESCRIPTION The Fujitsu MB54501 includes a low-noise amplifier and a mixer, which are used for front end of mobile telecommunication systems. Using Fujitsu’s advanced technology, MB54501 achieves an Icc of 6.0mA (typ.). s FEATURES Amplifier • • • • • • • • Mixer Supply voltage 3V (typ.) 3V (typ.) Current consumption 3mA (typ.) 3mA (typ.) Input frequency 1.1GHz (max.) 1.1GHz (max.) *1 15dB (typ.)*2 Gain 14dB (typ.

  MB54501   MB54501


Document
FUJITSU SEMICONDUCTOR DATA SHEET DS04-23505-1E ASSP CMOS FRONT-END LSI MB54501 s DESCRIPTION The Fujitsu MB54501 includes a low-noise amplifier and a mixer, which are used for front end of mobile telecommunication systems. Using Fujitsu’s advanced technology, MB54501 achieves an Icc of 6.0mA (typ.). s FEATURES Amplifier • • • • • • • • Mixer Supply voltage 3V (typ.) 3V (typ.) Current consumption 3mA (typ.) 3mA (typ.) Input frequency 1.1GHz (max.) 1.1GHz (max.) *1 15dB (typ.)*2 Gain 14dB (typ.) *1 Noise figure 2.2dB (typ.) 5dB (SSB, typ.)*2 1dB compression point –1dBm (typ.)*1 Input return loss 8dB (typ.)*1 Output return loss 10dB (typ.)*1 *1: Measured by the circuit of “measurement circuit example”. (fin = 878MHz) *2: Measured by the circuit of “measurement circuit example”. (IF = 90MHz) • 16-pin Plastic Shrink Small Outline Package (Suffix: -PFV) s PACKAGE 16-pin Plastic SSOP (FPT-16P-M05) MB54501 s PIN ASSIGNMENT (TOP VIEW) RFout 1 16 Lext GND 2 15 RFin GND 3 14 Rext VCC 4 13 NC NC 5 12 RE GND 6 11 RE GND 7 10 GND MIXin 8 9 MIXout (FPT-16P-M05) s ABSOLUTE MAXIMUM RATINGS Parameters Supply Voltage Output Voltage Output Current Storage Temperature Symbol VCC VO IO TSTG Value –0.5 to 7.0 –0.5 to VCC + 0.5 0 to 10 –55 to +125 Unit V V mA °C Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 MB54501 s EQUIVALENT CIRCUIT Vcc RFout Main Bias Circuit Lext RFin Main Bias Circuit MIXout MIXin Rext RE Amplifier Mixer s PIN DESCRIPTION Pin No. Pin Name 1 2 3 4 5 6 7 8 RFout GND GND VCC NC GND GND MIXin Description Amplifier output Ground Ground Power supply No connection Ground Ground Mixer input Pin No. Pin Name 9 10 11 RE 12 13 14 15 16 NC Rext RFin Lext No connection Emitter of a transistor for amplifier Amplifier input Amplifier load connection Emitter of a transistor for mixer MIXout GND Description Mixer output Ground 3 MB54501 s RECOMMENDED OPERATING CONDITIONS Value Parameter Supply Voltage Input Voltage Operating Temperature Symbol Min. VCC VI Ta 2.7 GND –40 Typ. 3.0 – – Max. 5.5 VCC +85 V V °C Unit Notes: To protect against damage by electrostatic discharge, note the following handling precautions: – Store and transport devices in conductive containers. – Use properly grounded workstations, tools, and equipment. – Turn off power before inserting or removing this device into or from a socket. – Protect leads with conductive sheet, when transporting a board mounted device. 4 MB54501 s ELECTRICAL CHARACTERISTICS AMPLIFIER (Vcc = +3.0V, Ta = 25°C) Parameter Supply Voltage Supply Current Operating Frequency Gain Noise Figure 1dB Compression Point Input Return Loss Output Return Loss Symbol VCC ICC fin Gain NF P1dB RLIN RLOUT Conditions –– –– –– –– –– Output –– –– Target Value Min. 2.7 –– –– –– –– –– –– –– Typ. 3.0 3.0 878 14 2.2 –1 8 10 Max. 5.5 –– 1100 –– –– –– –– –– Unit V mA MHz dB dB dBm dB dB Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page. MIXER (Vcc = +3.0V, Ta = 25°C) Parameter Supply Voltage Current Consumption Operating Frequency Gain Conversion Gain Noise Figure Symbol VCC ICC fin S21 GC NF Conditions –– –– –– Amplifier characteristics Mixer characteristics IF = 90MHz –– SSB Target Value Min. 2.7 –– –– –– –– –– Typ. 3.0 3.0 878 9 15 5 Max. 5.5 –– 1100 –– –– –– Unit V mA MHz dB dB dB Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page. 5 MB54501 s MEASUREMENT CIRCUIT (EXAMPLE) 2nH 50Ω Measuring apparatus 100p 1 3.9n RFout Lext 16 878MHz 100p 2 3 1µ Vcc = 3V 1000p GND RFin 15 6.8n GND Rext 14 1000p 4 5 6 Vcc NC 13 12 11 10 100p Vcc = 3V 1000p 1000p NC RE GND RE RF = 878MHz SAW 3p 100p 7 8 5.6n GND GND MIXin MIXout 9 1µ 150n 20p 1000p 30p IF = 90MHz 50Ω Measuring apparatus SAW LO = 788MHz 6 MB54501 s PACKAGE DIMENSIONS 16pins, Plastic SSOP (FPT-16P-M05) * 5.00±0.10(.197±.004) *: This dimension does not include resin protrusion. 1.25 –0.10 +.008 .049 –.004 +0.20 0.10(.004) INDEX *4.40±0.10 (.173±.004) 6.40±0.20 (.252±.008) 5.40(.213) NOM 0.65±0.12 (.0256±.0047) 0.22 –0.05 +.004 .009 –.002 +0.10 "A" 0.15 –0.02 +.002 .006 –.001 +0.05 Details of "A" part 0.10±0.10(.004±.004) (STAND OFF) 4.55(.179)REF 0 10° 0.50±0.20 (.020±.008) Dimensions in mm (inches). C 1994 FUJITSU LIMITED F16013S-2C-4 7 MB54501 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Na.


MB54502 MB54501 TLP650


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)