ISO-CMOS 8 x 12 Analog Switch Array
®
ISO-CMOS MT8815 8 x 12 Analog Switch Array
Features
• • • • • • • • • • Internal control latches and address decoder...
Description
®
ISO-CMOS MT8815 8 x 12 Analog Switch Array
Features
Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 13.2V 12Vpp analog signal capability R ON 65 Ω max. @ V DD=12V, 25°C ∆R ON ≤ 10Ω @ V DD=12V, 25°C Full CMOS switch for low distortion Minimum feedthrough and crosstalk Separate analog and digital reference supplies Low power consumption ISO-CMOS technology
ISSUE 1
November 1988
Ordering Information MT8815AC 40 Pin Ceramic DIP MT8815AE 40 Pin Plastic DIP MT8815AP 44 Pin PLCC -40° to 85°C
Description
The Mitel MT8815 is fabricated in MITEL’s ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 12 array of crosspoint switches along with a 7 to 96 line decoder and latch circuits. Any one of the 96 switches can be addressed by selecting the appropriate seven address bits. The selected switch can be turned on or off by applying a logical one or zero to the DATA input. VSS is the ground reference of the digital inputs. The range of the analog signal is from VDD to VEE.
Applications
Key systems PBX systems Mobile radio Test equipment /instrumentation Analog/digital multiplexers Audio/Video switching
STROBE
DATA RESET
VDD
VEE
VSS
1 AX0 AX1 AX2 AX3 AY0 AY1 AY2 96
1
8 x 12 7 to 96 Decoder Latches Switch Array
96
Xi I/O (i=0-11)
Yi I/O (i=0-7)
Figure 1 - Functional Block Diagram
3-39
MT8815
ISO-CMO...
Similar Datasheet