IN74ACT112

TECHNICAL DATA IN74ACT112 Dual J-K Flip-Flop with Set and Reset High-Speed Silicon-Gate CMOS The IN74ACT112 is identical in pinout to the LS/ALS112, HC/HCT112. The IN74ACT112 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. Each flip-flop is negative-edge clocked and has active-low asynchronous Set and Reset inputs. TTL/NMOS Compatible Input Levels Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 4.5 to 5.5 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C Outputs Source/Sink 24 mA ORDERING INFORMATION IN74ACT112N Plastic IN74ACT112D SOIC TA = -40° to 85° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM Inputs Set L H L H H H Reset H L L H H H H H H H L H Clock X X X J X X X L L H H X X X K X X X L H L H X X X Outputs Q H L L * Q L H L* H L No Change L H w w w .d h s a t a ee . u t4 m o c H H H H Toggle No Change No Change No Change PIN 16=VCC PIN 8 = GND * Both outputs will remain low as long as Set and Reset are low, but the output states are unpredictable if Set and Reset go high simultaneously X = Don’t Care 1 www.DataSheet4U.com FUNCTION TABLE IN74ACT112 MAXIMUM RATINGS* Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL * Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Pla...