8-1 Data Selector/Multiplexer
TECHNICAL DATA
8-Input Data Selector/Multiplexer with 3-State Outputs
High-Speed Silicon-Gate CMOS
The IN74ACT251 is id...
Description
TECHNICAL DATA
8-Input Data Selector/Multiplexer with 3-State Outputs
High-Speed Silicon-Gate CMOS
The IN74ACT251 is identical in pinout to the LS/ALS251, HC/HCT251. The IN74ACT251 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. The device selects one of the eight binary Data Inputs, as determined by the Address Inputs. The Output Enable pin must be at a low level for the selected data to appear at the outputs. If Output Enable is high, the Y and the Y outputs are in the high-impedance state. This 3-State feature allows the IN74ACT251 to be used in bus-oriented systems. TTL/NMOS Compatible Input Levels Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 4.5 to 5.5 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C Outputs Source/Sink 24 mA
IN74ACT251
ORDERING INFORMATION IN74ACT251N Plastic IN74ACT251D SOIC TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs A2 X L L L L H H H A1 X L L H H L L H A0 X L H L H L H L Output Enable H L L L L L L L Outputs Y Z D0 D1 D2 D3 D4 D5 D6 Y Z D0 D1 D2 D3 D4 D5 D6
w
w
w
.d
h s a t a
ee
. u t4
PIN 16 =VCC PIN 8 = GND
m o c
H H H L D7 D7 D0,D1...D7=the level of the respective D input Z = high-impedance state X = don’t care
1
www.DataSheet4U.com
IN74ACT251
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Volt...
Similar Datasheet