Octal Buffer/Line Driver
TECHNICAL DATA
IN74AC241
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
High-Speed Silicon-Gate CMOS
The ...
Description
TECHNICAL DATA
IN74AC241
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
High-Speed Silicon-Gate CMOS
The IN74AC241 is identical in pinout to the LS/ALS241, HC/HCT241. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. This octal noninverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has noninverting outputs and two output enables. Enable A is active-low and Enable B is active-high. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA; 0.1 µA @ 25°C High Noise Immunity Characteristic of CMOS Devices Outputs Source/Sink 24 mA
ORDERING INFORMATION IN74AC241N Plastic IN74AC241DW SOIC TA = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs Enable A A L H X Output YA L H Z Inputs Enable B H H L B L H X Output YB L H Z
w
w
w
.d
e e h s a t a
. u t4
PIN 20=VCC PIN 10 = GND
m o c
L L H
X = don’t care Z = high impedance
1
www.DataSheet4U.com
IN74AC241
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic ...
Similar Datasheet