Dual 4-Bit Static Shift Register
TECHNICAL DATA
IW4015B
Dual 4-Stage Static Shift Register
The IW4015B consists of two identical, independent, 4-stage ...
Description
TECHNICAL DATA
IW4015B
Dual 4-Stage Static Shift Register
The IW4015B consists of two identical, independent, 4-stage serialinput/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. “Q” outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA input is transferred into the first register stage and shifted over one stage at each positive-going clock transition. Resetting of all stages is accomplished by a high level on the reset line. Register expansion to 8 stages using one IW4015B package, or to more than 8 stages using additional IW4015B’s is possible. Operating Voltage Range: 3.0 to 18 V Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 2.5 V min @ 15.0 V supply
ORDERING INFORMATION IW4015BN Plastic IW4015BD SOIC TA = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs Clock Data L H X X X Reset L L L H Outputs Q1 L H L Qn Qn-1 Qn-1 L
w
w
w
.d
e e h s a t a
. u t4
m o c
PIN 16=VCC PIN 8= GND
No change
X = don’t care
1
www.DataSheet4U.com
IW4015B
MAXIMUM RATINGS*
Symbol VCC VIN VOUT IIN PD PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Vol...
Similar Datasheet