www.vishay.com
LH1500AAB, LH1500AABTR, LH1500AT
Vishay Semiconductors
1 Form A Solid-State Relay (Normally Open)
FEAT...
www.vishay.com
LH1500AAB, LH1500AABTR, LH1500AT
Vishay Semiconductors
1 Form A Solid-State Relay (Normally Open)
FEATURES
Isolation test voltage 5300 VRMS
A1
6 S1
Typical RON 22 Ω
Load voltage 350 V
C2
5 DC
Load current 140 mA / 250 mA
High surge capability
3
4 S2
Clean bounce free switching
Low power consumption
Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
Product Page
Design Tools
Models
DESCRIPTION
The LH1500 is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is constructed using a GaAlAs LED for actuation control and MOSFETs for the switch output.
APPLICATIONS General telecom switching Security equipment Instrumentation Industrial controls
AGENCY APPROVALS UL 1577 cUL DIN EN 60747-5-5 (VDE 0884-5) FIMKO
ORDERING INFORMATION
L
H
1
5
0
PART NUMBER
PACKAGE SMD-6, tube SMD-6, tape and reel DIP-6, tube
0
#
#
#
ELECTR. PACKAGE VARIATION CONFIG.
T
R
DIP-6
TAPE AND REEL
7.62 mm
UL, cUL, FIMKO, VDE LH1500AAB
LH1500AABTR LH1500AT
SMD-6 > 0.1 mm
Rev. 2.3, 11-Aug-2023
1
Document Number: 83804
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.c...