SY605

125MHz WRITE PROGRAMMABLE TIMING EDGE VERNIER FEATURES s True 125MHz retrigger rate s Pin-compatible with Bt605 s 15ps delay resolution s Less than ± 1 LSB timing accuracy s Differential TRIGGER and delay WRITE inputs s Delay spans from 4 to 40ns s Compatible with 10KH ECL logic s Lower power dissipation 350mW typical s Available in 28-pin plastic (PLCC) or metal (MLCC) J-lead package SY605 DESCRIPTION Micrel-Synergy's SY605 is an ECL-compatible timing vernier (delay generator) whose time delay is programmed via an 8bit code which is loaded via an independent "WRITE" input. The SY605 is fabricated in Micrel-Synergy's proprietary ASSET™ bipolar process. This device can be retriggered at speeds up to 125MHz, with a delay span as short as 4ns. At minimum span, the resolution is 4ns/255 = 15.7ps per step. The delay span is externally adjustable up to 40ns. The SY605 employs differential TRIGGER and WRITE inputs, and produces a differential OUTPUT pulse; all other control signals are singleended ECL. Edge delay is specified by an 8-bit input which is loaded into the device with the WRITE signal. The output pulse width will typically be 3.5ns. The SY605 is commonly used in Automatic Test Equipment to provide precise timing edge placement; it is also found in many instrumentation and communications applications. Micrel-Synergy's circuit design techniques coupled with ASSET™ technology result in not only ultra-fast performance, but allow device operation at lower power dissipation ...