ST7LITE0

ST7LITE0, ST7SUPERLITE 8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI s Memories – 1K or 1.5K bytes single voltage Flash Program memory with read-out protection, In-Circuit and In-Application Programming (ICP and IAP). 10K write/erase cycles guaranteed, data retention: 20 years at 55°C. – 128 bytes RAM. – 128 bytes data EEPROM with read-out protection. 300K write/erase cycles guaranteed, data retention: 20 years at 55°C. Clock, Reset and Supply Management – 3-level low voltage supervisor (LVD) and auxiliary voltage detector (AVD) for safe poweron/off procedures – Clock sources: internal 1MHz RC 1% oscillator or external clock – PLL x4 or x8 for 4 or 8 MHz internal clock – Four Power Saving Modes: Halt, Active-Halt, Wait and Slow Interrupt Management – 10 interrupt vectors plus TRAP and RESET – 4 external interrupt lines (on 4 vectors) I/O Ports – 13 multifunctional bidirectional I/O lines – 9 alternate function lines – 6 high sink outputs 2 Timers – One 8-bit Lite Timer (LT) with prescaler including: watchdog, 1 realtime base and 1 input capture. DIP16 s SO16 150” – One 12-bit Auto-reload Timer (AT) with output compare function and PWM s 1 Communication Interface – SPI synchronous serial interface A/D Converter – 8-bit resolution for 0 to V DD – Fixed gain Op-amp for 11-bit resolution in 0 to 250 mV range (@ 5V VDD) – 5 input channels Instruction Set – 8-bit data manipulation – 63 basic instructions – 17 main addressing modes – 8 x 8 unsigned m...