(ST62T10 - ST62E25) 8-BIT OTP/EPROM MCUs WITH A/D CONVERTER
ST62T10, T15, T20, T25 - ST62E20, E25
8-BIT OTP/EPROM MCUs WITH A/D CONVERTER
s 3.0 to 6.0V Supply Operating Range
s 8 ...
Description
ST62T10, T15, T20, T25 - ST62E20, E25
8-BIT OTP/EPROM MCUs WITH A/D CONVERTER
s 3.0 to 6.0V Supply Operating Range
s 8 MHz Maximum Clock Frequency
s -40 to +85°C Operating Temperature Range
s Run, Wait and Stop Modes
s 5 Interrupt Vectors
s Look-up Table capability in OTP/EPROM
s Data OTP/EPROM: User selectable size (in program EPROM)
s Data RAM: 64 bytes
s 12/20 I/O pins, fully programmable as: – Input with pull-up resistor – Input without pull-up resistor – Input with interrupt generation – Open-drain or push-pull output – Analog Input
s 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly
s 8-bit Timer with 7-bit programmable prescaler and external input
s Digital Watchdog
s 8-bit A/D Converter with 8 (ST62T10, T20, E20) or 16 (ST62T15, T25, E25) analog inputs
s On-chip Clock oscillator can be driven by Quartz crystal or Ceramic resonator
s Power-on Reset
s One external Non-Maskable Interrupt
s ST626x-EMU Emulation and Development System (connects to an MS-DO...
Similar Datasheet