Document
Product Datasheet 2.1.1 Conan® OCC8001-02
§ § Fully compliant with D2B Mode0 Protocol 4.2336Mbps source data rate (equivalent to 3 x 16bit stereo audio channels) Integration of source and control data Multiple source data channels SPDIF audio port I2C and SPI compatible control port Flexible source data routing Implements all low-level communication tasks:
§ § § Communication Protocol (subframes, synchronisation,...) Communication Management (CRC, ACK, NAK, retries,...) Transparent channels
§
Electrical Bypass RX Network Receiver Transmitter TX
SR0
Source Data In 0 SPDIF In
Source Data Router
Source Data Out 0 SPDIF Out
SX0
§ § § § §
SR1
Source Data In 1
Source Data Out 1
SX1
SR2
Source Data In 2
Source Data Out 2
SX2
XTO Oscillator XTI FILT VREF VDDD GNDD I2C/SPI Interface PLL
Clock Manager
Audio Sync
RMCK FSY SCK
Control Unit Control Port
/RST VDDA GNDA
For SPI /CS For I2C : AD1
SDIN AD0
SDOUT SCL SDA SCL
/INT ERROR SER_IN SER_OUT
Block Diagram
§ §
Easy hardware and software implementation Few external components required
THE D2B PROTOCOL The Digital Data Bus (D2B) is a networking protocol for automotive multimedia data communication integrating digital audio, video and other high data rate synchronous or asynchronous signals, with the control data for network management protocols and APIs. The protocol enables robust single cable interconnection and compatible interoperation of in-car AV multimedia and ITS devices, such as Radio Head Units, CD Changer, CD-ROM, GPS Navigation, Voice Control, Car Telephones, TV and others.
CONAN® - OCC8001-02 The OCC8001-02 transceiver is a pin compatible successor of the OCC8001-01 with identical functionality, featuring decreased power and reduced EMI The CONAN® is an advanced CMOS device which enhances network design by integrating source data routing and communication protocol management. handles multiple source data channels via common serial interface standards, CONTROL PORT Device control is handled via the control port, which can be configured as either an I2C or SPI compliant interface. The choice of interface is specified during hardware resets. NETWORK INTERFACE Data is organized in frames which are transmitted at the system sampling frequency. Frames contain source and control information and are further divided into sub-frames of 8 bytes fields. At the physical level, data is transferred as serial bits with biphase encoding.
LCD DISPLAY
MOBILE TELEPHONE
RADIO HEAD-UNIT GPS ENGINE DVD PLAYER
VOICE I/O
DSP AMPLIFIER
VEHICLE EMERGENCY SYSTEM (VEMS) FIXED TELEPHONE HANDSET
CD-CHANGER
Control data is constructed into a control frame, which is transferred at a rate of two bits per sub-frame. The control frame comprises 128 bits and requires a block of 48 frames to transmit. SOURCE DATA PORTS Six source data ports are provided, giving the flexibility for multiple data
Electrical Bypass
Source Data Bypass L RX 64-bit input shift register D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 .