SD5600/5610
Optoschmitt Detector
FEATURES • TO-46 metal can package
• 6¡ (nominal) acceptance angle • High noise immuni...
SD5600/5610
Optoschmitt Detector
FEATURES TO-46 metal can package
6¡ (nominal) acceptance angle High noise immunity output TTL/LSTTL/CMOS compatible Buffer (SD5600) or inverting (SD5610) logic available Mechanically and spectrally matched to SE3450/5450, SE3455/5455 and SE3470/5470 infrared emitting diodes
INFRA-81.TIF
DESCRIPTION The SD5600/5610 series is a family of single chip Optoschmitt IC detectors mounted in a TO-46 metal can package. The photodetector consists of a photodiode, amplifier, voltage
regulator, Schmitt trigger and an
NPN output
transistor with 10 kì (nominal) pull-up resistor. Output rise and fall times are independent of the rate of change of incident light. Detector sensitivity has been internally temperature compensated. The TO-46 package is ideally suited for operation in hostile environments. Device Polarity: Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level.
OUTLINE DIMENSIONS in inches (mm) 3 plc decimals ±0.005(0.12) Tolerance 2 plc decimals ±0.020(0.51)
DIM_025.cdr
176
h
Honeywell reserves the right to make changes in order to improve design and supply the best products possible.
www.DataSheet4U.com
www.DataSheet4U.com
www.DataSheet4U.com
SD5600/5610
Optoschmitt Detector
ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS
ABSOLUTE MAXIMUM RATINGS
(25¡C Free-Air Tempe...