ST92195C

ST92195C/D 48-96 Kbyte ROM HCMOS MCU WITH ON-SCREEN DISPLAY AND TELETEXT DATA SLICER s s s s s s s s s s s s s s s s s s s s Register File based 8/16 bit Core Architecture with RUN, WFI, SLOW and HALT modes 0°C to +70°C operating temperature range Up to 24 MHz. operation @ 5V±10% Min. instruction cycle time: 165ns at 24 MHz. 48, 56, 64, 84 or 96 Kbytes ROM 256 bytes RAM of Register file (accumulators or index registers) 256 to 512 bytes of on-chip static RAM 2 or 8 Kbytes of TDSRAM (Teletext and Display Storage RAM) 28 fully programmable I/O pins Serial Peripheral Interface Flexible Clock controller for OSD, Data Slicer and Core clocks running from a single low frequency external crystal. Enhanced display controller with 26 rows of 40/80 characters – 2 sets of 512 characters – Serial and Parallel attributes – 10x10 dot matrix, definable by user – 4/3 and 16/9 supported in 50/60Hz and 100/ 120 Hz mode – Rounding, fringe, double width, double height, scrolling, cursor, full background color, halfintensity color, translucency and half-tone modes Teletext unit, including Data Slicer, Acquisition Unit and up to 8 Kbytes RAM for data storage VPS and Wide Screen Signalling slicer Integrated Sync Extractor and Sync Controller 14-bit Voltage Synthesis for tuning reference voltage Up to 6 external interrupts plus one NonMaskable Interrupt 8 x 8-bit programmable PWM outputs with 5V open-drain or push-pull capability 16-bit watchdog timer with 8-bit prescaler 1 or 2 16-bit stan...