(UF4001 - UF4007) ULTRAFAST EFFICIENT PLASTIC RECTIFIER
UF4001 THRU UF4007
ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
DO-204AL
Forward Current - ...
Description
UF4001 THRU UF4007
ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
DO-204AL
Forward Current - 1.0 Ampere
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ 1.0 ampere operation at TA=55°C with no thermal runaway ♦ Glass passivated chip junction ♦ Low cost ♦ Ultrafast recovery time for high efficiency ♦ Low forward voltage ♦ Low leakage current ♦ High surge current capability ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
FEATURES
1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA.
0.205 (5.2) 0.160 (4.1)
1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA.
NOTE: Lead diameter is 0.026 (0.66)
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram
0.023 (0.58)
for suffix "E" part numbers
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
. Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
UF 4001
UF 4002
UF 4003
UF 4004
UF 4005
UF 4006
UF 4007
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maxi...
Similar Datasheet