DUAL VOLTAGE COMPARATOR
TA75W393FU
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA75W393FU
Dual Voltage Comparator
This device c...
Description
TA75W393FU
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA75W393FU
Dual Voltage Comparator
This device consist of two independent voltage comparators that designed to operate from a single power supply over a wide range of voltage. Normal operation from dual supplies is also to be guaranteed on voltage range from ± 1V to ± 18V. VCC is necessary at least more 1.5V volts than the input common mode voltage. The output can be connected to other open collector outputs to achieve Wired-OR relation ship.
Features
Weight: 0.021g (typ.)
Compatible to TA75393F.
Single supply voltage range or dual supplies : 2V to 36V or ± 1V to ± 18V
Low supply current
: 0.8mA (typ.)
Low input offset voltage
: ±2mV (typ.)
Wide input common mode voltage range
: 0V to VCC − 1.5V
Output compatible with TTL, DTL, MOS and CMOS logic system.
The output can be connected to achieve Wired-OR relation..
Marking (Top View)
Pin Connection (Top View)
Start of commercial production
1991-08
1
2017-12-05
Equivalent Circuit
TA75W393FU
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Supply voltage Differential input voltage Input voltage Power dissipation Operating temperature Storage temperature
VCC, VEE
±18 or 36
V
DVIN
±36
V
VIN
−0.3 to VCC
V
PD
250
mW
Topr
−40 to 85
°C
Tstg
−55 to 125
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temp...
Similar Datasheet