DatasheetsPDF.com

AS204-80 Dataheets PDF



Part Number AS204-80
Manufacturers Skyworks Solutions
Logo Skyworks Solutions
Description GaAs IC SP4T Non-Reflective Switch
Datasheet AS204-80 DatasheetAS204-80 Datasheet (PDF)

GaAs IC SP4T Non-Reflective Switch With Driver DC–3.5 GHz AS204-80 Features ■ Integrated Driver +5 V Supply Voltage ■ High Isolation (45 dB @ 0.9 GHz) ■ Low Insertion Loss (0.5 dB @ 0.9 GHz) ■ SSOP-16 Plastic Package ■ Non-Reflective All Ports SSOP-16 (-80) 0.025 (0.635 mm) TYP. PIN 16 0.244 (6.20 mm) 0.228 (5.80 mm) PIN 1 0.0196 X 45˚ CHAMFER R 0.013/ 0.008 R 0.008 MIN. 0.010 0.010 (0.25 mm) (0.25 mm) 0.004 (0.10 mm) TYP. 5˚ -15˚ 0.050 (1.27 mm) 0.016 (0.40 mm) 8˚ MAX. 0.158 (4.00 mm) 0.150 (3.

  AS204-80   AS204-80



Document
GaAs IC SP4T Non-Reflective Switch With Driver DC–3.5 GHz AS204-80 Features ■ Integrated Driver +5 V Supply Voltage ■ High Isolation (45 dB @ 0.9 GHz) ■ Low Insertion Loss (0.5 dB @ 0.9 GHz) ■ SSOP-16 Plastic Package ■ Non-Reflective All Ports SSOP-16 (-80) 0.025 (0.635 mm) TYP. PIN 16 0.244 (6.20 mm) 0.228 (5.80 mm) PIN 1 0.0196 X 45˚ CHAMFER R 0.013/ 0.008 R 0.008 MIN. 0.010 0.010 (0.25 mm) (0.25 mm) 0.004 (0.10 mm) TYP. 5˚ -15˚ 0.050 (1.27 mm) 0.016 (0.40 mm) 8˚ MAX. 0.158 (4.00 mm) 0.150 (3.80 mm) 0.197 (5.00 mm) 0.189 (4.80 mm) Description The AS204-80 is a high isolation SP4T FET IC nonreflective switch with driver. The insertion loss is 0.5 dB and isolation is 45 dB at 0.9 GHz. The switch is ideal for cellular base station switch matrices. 0.068 (1.73 mm) MAX. 0.0098 (0.25 mm) Electrical Specifications at 25°C (+5 V) Parameter1 Insertion Loss3 Frequency2 DC–1.0 DC–2.0 DC–2.5 DC–3.5 DC–1.0 DC–2.0 DC–2.5 DC–3.5 Off State GHz GHz GHz GHz GHz GHz GHz GHz 40 30 28 22 Min. Typ. 0.4 0.6 0.7 0.9 45 38 32 25 1.3:1 1.5:1 Max. 0.6 0.8 0.9 1.2 Unit dB dB dB dB dB dB dB dB Isolation VSWR4 On State VSWR4 DC–3.5 GHz 0.5–3.5 GHz Operating Characteristics at 25°C (+5 V) Parameter Switching Characteristics5 Condition Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru 0.50–2.0 GHz For Two-tone Input Power +13 dBm CTL1, 2 Low CTL1, 2 High +5 V ± 0.20 V @ 500 µA Typ. 0.50–2.0 GHz 0.05 GHz VCC = 5 ± 0.2 V 0.0 2.4 Frequency Min. Typ. 75 125 50 +26 +40 +29 0.5 5.0 Max. Unit ns ns mV dBm dBm dBm V V Input Power for 1 dB Compression Intermodulation Intercept Point (IP3) Control Voltages6 Supply Voltage, VCC6 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. DC = 300 kHz. 3. Insertion loss changes by 0.003 dB/°C. 4. Input/Output. 5. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth. 6. VCC must be powered on by a minimum of 10 ns prior to VCTL. Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 2/03A 1 GaAs IC SP4T Non-Reflective Switch With Driver DC–3.5 GHz AS204-80 Typical Performance Data 0 -20 -30 Insertion Loss (dBm) -0.2 Isolation (dBm) J1–J3 -0.4 J1–J5 -0.6 -0.8 J1–J2 J1–J4 -40 -50 -60 -70 -80 J1–J2 J1–J4 J1–J3 -90 J1–J5 -1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency 2.0 1.8 Isolation vs. Frequency Absolute Maximum Ratings Characteristic RF Input Power Value 0.8 W > 500 MHz 0.2 W @ 50 MHz 6V -0.2 V, +6 V -40°C to +85°C -65°C to +150°C 30°C/W VSWR 1.6 J2–J5_OFF 1.4 J2–J5_ON (S11) 1.2 1.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 J2–J5_ON (S22) Supply Voltage Control Voltage Operating Temperature Storage Temperature ΘJC Frequency (GHz) Pin Out J1 50 Ω CBL GND GND GND GND GND CBL GND CBL CTL1 CTL2 J2 J3 16 1 15 14 13 12 2 VSWR vs. Frequency 50 Ω Truth Table Insertion Loss Pat.


M52025SP AS204-80 AS205-322


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)