Document
FUJITSU SEMICONDUCTOR DATA SHEET
DS07-12506-4E
8-bit Proprietary Microcontroller
CMOS
F2MC-8L MB89150/150A Series
MB89151/151A/152/152A/153/153A/154/154A/155/155A MB89P155/PV150
s DESCRIPTION
The MB89150/A series has been developed as general-purpose version of the F2MC*-8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to a compact instruction set, the MB89150 series microcontrollers contain a variety of peripheral functions such as dual-clock control system, five operating speed control stages, timers, a serial interface, a remote control transmission output, external interrupts, an LCD controller/driver, an LCD booster, and a watch prescaler. *: F2MC stands for FUJITSU Flexible Microcontroller.
s FEATURES
• • • • • • • • • • F2MC-8L family CPU core Dual-clock system High-speed processing at low voltage Minimum execution time: 0.95 µs/2.7 V, 1.33 µs/2.2 V I/O ports: max. 43 channels 21-bit time-base timer 8/16-bit timer/counter: 1 channel (8 bits × 2 channels) 8-bit serial I/O: 1 channel LCD controller/driver: Max. 36 segments × 4 commons (built-in booster) Remote control transmission output
(Continued)
s PACKAGE
80-pin Plastic QFP 80-pin Plastic LQFP 80-pin Plastic LQFP 80-pin Ceramic MQFP
(FPT-80P-M06)
(FPT-80P-M11)
(FPT-80P-M05)
(MQP-80C-P01)
MB89150/150A Series
(Continued) • Buzzer output • Watch prescaler (15 bits) • External interrupts (wake-up function) Four independent channels with edge detection function plus eight level-interrupt channels
s PRODUCT LINEUP
Part number Parameter
MB89151/A MB89152/A MB89153/A MB89154/A MB89155/A MB89P155 MB89PV150 One-time PROM product
Piggyback/ evaluation product (for evaluation and development)
Classification Mass production products (mask ROM products) ROM size
4 K × 8 bits 6 K × 8 bits 8 K × 8 bits 12 K × 8 bits 16 K × 8 bits 16 K × 8 bits 32 K × 8 bits (internal (internal (internal (internal (internal (internal (external mask ROM) mask ROM) mask ROM) mask ROM) mask ROM) PROM, ROM)
programming with generalpurpose EPROM programmer)
RAM size CPU functions
128 × 8 bits Number of instructions: Instruction bit length: Instruction length: Data bit length: Minimum execution time: Interrupt processing time: I/O port (N-ch open-drain):
256 × 8 bits 136 8 bits 1 to 3 bytes 1, 8, 16 bits 0.95 µs/4.2 MHz 8.57 µs/4.2 MHz
512 × 8 bits
Ports
8 (6 ports also serve as peripherals, 3 ports are a high-current drive type.) Output port (N-ch open-drain): 18 (16 ports also serve as segment pins, 2 ports serve as boost capacitor connection pins.)*1 I/O port (CMOS): 16 (12 ports also serve as an external interrupt.) Output port (CMOS): 1 (Also serves as a remote control.) Total: 43 (max.) 8-bit timer counter × 2 channel or 16-bit event counter × 1 channel 8 bits LSB first/MSB first selectability Common output: Segment output: Bias power supply pins: LCD display RAM size: Booster for LCD driving: Dividing resistor for LCD driving: 4 32 (max.)*1 4 36 × 4 bits Built-in*1 Built-in (an external resistor selectability) 4 (edge selectability) 8 (level interrupt only) 1 (7 frequencies are selectable by the software.) No reference voltage generator and booster for LCD driving
Timer/counter 8-bit serial I/O LCD controller/ driver
External interrupts
(wake-up function)
Buzzer output
(Continued)
2
MB89150/150A Series
(Continued)
Part number Parameter
MB89151/A MB89152/A MB89153/A MB89154/A MB89155/A MB89P155 MB89PV150
Remote control transmission output Standby modes Process
Operating voltage*2
1 (Pulse width and cycle are software selectable.) Sleep mode, stop mode, and watch mode CMOS 2.2 V to 6.0 V (single clock)/2.2 V to 4.0 V (dual clock) 2.7 V to 6.0 V
MBM27C256A -20TV (LCC package)
EPROM for use
*1: Selected by the mask option. See section “s Mask Options.” *2: Varies with conditions such as the operating frequency and the connected ICE. (See section “ s Electrical Characteristics.”)
s PACKAGE AND CORRESPONDING PRODUCTS
Package MB89151/A MB89152/A MB89153/A MB89154/A MB89155/A MB89P155 MB89PV150 × × × × ×
FPT-80P-M06 FPT-80P-M11 FPT-80P-M05 MQP-80C-P01 : Available
× : Not available
Note: For more information about each package, see section “s Package Dimensions.”
3
MB89150/150A Series
s DIFFERENCES AMONG PRODUCTS
1. Memory Size
Before evaluating using the piggyback product, verify its differences from the product that will actually be used. Take particular care on the following points: • On the MB89151/A, addresses 0140H and later of the register bank cannot be used. On the MB89152/A, 153/A, 154/A, 155/A, and MB89P155, addresses 0180H and later of each register bank cannot be used. • On the MB89P155, addresses BFF0H to BFF6H comprise the option setting area, option settings can be read by reading these addresses. • The stack area, etc., is set at the upper limit of the RAM.
2. Current Consumption
• In the case of the MB89PV150, add the current consumed by the EPROM which is connected to the top socket. • When operat.