Data Sheet PT8A2611/2621 PIR Sensor Light Switch Controller
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||...
Data Sheet PT8A2611/2621 PIR Sensor Light Switch Controller
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Features
General Description
The PT8A2611 and PT8A2621 are low power mixed signal CMOS LSI designed for the automatic lamp control using PIR sensor as motion detector. With on chip noise filter and voltage
regulator, the IC provides stable operations throughout temperature range. CDS input to disable day time operation is desired.
2-stage operational amplifier as filter Built-in noise rejection circuit On-chip
regulator Override function (PT8A2621 only) Synchronous with AC 220V/50Hz and 110V/60Hz Pulse output (PT8A2611) for TRIAC drive or level output (PT8A2621) for relay drive CDS to enable/disable output Adjustable output on time duration ON/AUTO/OFF selectable by MODE pin Auto-reset if the ZC signal disappears over 3 seconds 40 seconds warm-up Quick check mode for initial installation Operating voltage: 5V Stand-by current: 80µA Package:16-pin DIP and 16-pin SOP
Function Comparison
Override PT8A2611 PT8A2621 No function Twice CDS feedback Output Internal With external components (see Fig. 10, D9 and R15) TRIAC RELAY
Applications
Energy saving auto-switch in Garden, kitchen, bathroom, corridor, storage or yard Auto light...