LIMITING POST AMPLIFIER
Micrel, Inc.
5V/3.3V 2.5Gbps LIMITING POST AMPLIFIER WITH SIGNAL DETECT
SY88943V
SY88943V
FEATURES
s 3.3V and 5V powe...
Description
Micrel, Inc.
5V/3.3V 2.5Gbps LIMITING POST AMPLIFIER WITH SIGNAL DETECT
SY88943V
SY88943V
FEATURES
s 3.3V and 5V power supply options s Up to 2.5Gbps operation s Low noise s Chatter-fee signal detect (SD) generation s Open collector TTL signal detect (SD) output s TTL EN input s Differential PECL inputs for data s Single power supply s Designed for use with Micrel-Synergy laser diode
driver and controller s Available in a tiny (3mm) 10-pin MSOP
APPLICATIONS
s 1.25Gbps and 2.5Gbps ethernet s 531Mbps, 1062Mbps and 2.12Gbps Fibre Channel s 622Mbps SONET s Gigabit interface converter s 2.5Gbps SDH/SONET s 2.5Gbps proprietary links
DESCRIPTION
The SY88943V limiting post amplifier with its high gain and wide bandwidth is ideal for use as a post amplifier in fiber-optic receivers with data rates up to 2.5Gbps. Signals as small as 5mVp-p can be amplified to drive devices with PECL inputs. The SY88943V generates a chatter-free Signal Detect (SD) open collector TTL output.
The SY88943V incorporates a programmable level detect function to identify when the input signal has been lost. The SD output will change from logic “HIGH” to logic “LOW” when input signal is smaller than the swing set by SDLVL. This information can be fed back to the EN input of the device to maintain stability under loss of signal condition. Using SDLVL pin, the sensitivity of the level detection can be adjusted. The SDLVL voltage can be set by connecting a resistor divider between VCC and VREF as shown in Figu...
Similar Datasheet