MTB33N10E

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MTB33N10E/D ™ Data Sheet TMOS E-FET.™ High Energy Power FET D2PAK for Surface Mount Designer's MTB33N10E Motorola Preferred Device N–Channel Enhancement–Mode Silicon Gate The D2PAK package has the capability of housing a larger die than any existing surface mount package which allows it to be used in applications that require the use of surface mount components with higher power and lower RDS(on) capabilities. This advanced TMOS E–FET is designed to withstand high energy in the avalanche and commutation modes. The new energy efficient design also offers a drain–to–source diode with a fast recovery time. Designed for low voltage, high speed switching applications in power supplies, converters and PWM motor controls, these devices are particularly well suited for bridge circuits where diode speed and commutating safe operating areas are critical and offer additional safety margin against unexpected voltage transients. Avalanche Energy Specified Source–to–Drain Diode Recovery Time Comparable to a Discrete Fast Recovery Diode Diode is Characterized for Use in Bridge Circuits IDSS and VDS(on) Specified at Elevated Temperature Short Heatsink Tab Manufactured — Not Sheared Specially Designed Leadframe for Maximum Power Dissipation Available in 24 mm 13–inch/800 Unit Tape & Reel, Add T4 Suffix to Part Number MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Drain–Source Voltage Drain–Gate Voltage ...