PROTECTED QUAD POWER DRIVER
2543
UDN/UDQ2543B
OUT4 K OUT3 GROUND GROUND OUT2 K OUT1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 IN 4 IN3 ENABLE GROUND GR...
Description
2543
UDN/UDQ2543B
OUT4 K OUT3 GROUND GROUND OUT2 K OUT1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 IN 4 IN3 ENABLE GROUND GROUND V CC IN 2 IN 1
PROTECTED QUAD POWER DRIVER
Providing interface between low-level logic and power loads to 100 W, the UDx2543B and UDx2543EB quad power drivers combine AND logic gates and high-current bipolar outputs. Each of the four independent outputs can sink up to 700 mA in the ON state. The outputs have a minimum breakdown voltage (load dump) of 60 V and a sustaining voltage of 35 V. The inputs are compatible with most TTL, DTL, LSTTL, and 5 V CMOS and PMOS logic systems. Over-current protection has been designed into each channel of the UDx2543B/EB and typically occurs at 1 A. It protects any one channel from output short circuits with supply voltages up to 25 V. When the maximum output current is reached, that output stage is driven linearly. If the over-current condition continues, that output’s thermal limiting will operate, limiting that output’s power dissipation to approximately 2.4 W. The outputs also include diodes for voltage clamping with inductive loads such as relays, solenoids, or dc stepper motors. These devices are supplied in a 16-pin power DIP of batwing construction (suffix ‘B’) to provide for maximum package power dissipation. They are also available in a 28-lead PLCC (suffix ‘EB’) for surface-mount applications. All devices are rated for continuous operation over the temperature range of -20°C to +85°C (UDN2543B/ EB) or for us...
Similar Datasheet