DatasheetsPDF.com

ST2600C Dataheets PDF



Part Number ST2600C
Manufacturers International Rectifier
Logo International Rectifier
Description PHASE CONTROL THYRISTORS Hockey Puk Version
Datasheet ST2600C DatasheetST2600C Datasheet (PDF)

Previous Datasheet Index Next Data Sheet Bulletin I25199/A ST2600C..R SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Double side cooling High surge capability High mean current Fatigue free 2630A Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters IT(AV) @ TC IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz I t 2 (R-PUK) Units A °C A °C A °C A A KA2s KA2s V µs °C ST2600C..R 2220 80 2630 55 4800 25 460.

  ST2600C   ST2600C


Document
Previous Datasheet Index Next Data Sheet Bulletin I25199/A ST2600C..R SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Double side cooling High surge capability High mean current Fatigue free 2630A Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters IT(AV) @ TC IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz I t 2 (R-PUK) Units A °C A °C A °C A A KA2s KA2s V µs °C ST2600C..R 2220 80 2630 55 4800 25 46000 48200 10580 9640 2000 to 3000 @ 50Hz @ 60Hz V DRM /V RRM tq TJ typical max. 400 125 D-419 To Order Previous Datasheet Index Next Data Sheet ST2600C..R Series ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 20 22 ST2600C..R 24 26 28 30 V DRM /V RRM , max. repetitive peak and off-state voltage V 2000 2200 2400 2600 2800 3000 VRSM , maximum nonrepetitive peak voltage V 2100 2300 2500 2700 2900 3100 I DRM /I RRM max. @ TC = 125°C mA 250 On-state Conduction Parameter I T(AV) Max. average on-state current @ Case temperature I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current ST2600C..R 2220 (1440) 80 2630 (1160) 55 (85) 4800 46000 48200 36800 38500 Units A °C A °C A Conditions 12 180° conduction, half sine wave double side (single side [anode side]) cooled DC @ 25°C heatsink temperature double side cooled t = 10ms No voltage reapplied 50% VRRM reapplied No voltage reapplied 50% VRRM reapplied Sinusoidal half wave, Initial TC = 125°C A t = 8.3ms t = 10ms t = 8.3ms t = 10ms t = 8.3ms t = 10ms t = 8.3ms TJ = TJ max. TJ = TJ max. I2 t Maximum I2t for fusing 10580 9640 6770 6150 KA2s V T(TO) Max. value of threshold voltage rt V TM IL Max. value of on-state slope resistance Max. on-state voltage Max. (typical) latching current 0.89 0.19 1.45 300 (100) V mΩ V mA I = 2900A, TC = 25°C pk T J = 25°C, V D = 5V 2222222222222 Switching Parameter di/dt Max. repetitive 50Hz (no repetitive) rate of rise of turned-on current t d ST2600C..R 150 (300) Units Conditions A/µs From 67% VDRM gate drive 20V, 20Ω, t = 1µs r TJ = TJ max. Gate drive 30V, 15Ω, V = 67% VDRM, TJ = 25°C d Maximum delay time 2.0 µs Rise time 0.5µs IT = 800A, t = 1ms, TJ = TJ max, VRM = 50V, p t q Typical turn-off time 400 dIRR/dt = 20A/µs, VDR = 67% VDRM, dV/dt = 20V/µs linear D-420 To Order Previous Datasheet Index Next Data Sheet ST2600C..R Series Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Voltage Drop Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current D-423 To Order Previous Datasheet Index Next Data Sheet ST2600C..R Series Fig. 7 - Stored Charged Fig. 8 - Thermal Impedance Z thJ-C Characteristics Fig. 9 - Gate Characteristics D-424 To Order Previous Datasheet Index Next Data Sheet ST2600C..R Series Blocking Parameter dv/dt IRRM IDRM Maximum linear rate of rise of off-state voltage Max. peak reverse and off-state leakage current ST2600C..R 500 250 Units V/µs mA Conditions TJ = TJ max. to 67% rated VDRM TJ = 125°C rated V DRM/V RRM applied Triggering Parameter PGM PG(AV) IGM VGM -VGM IGT VGT Maximum peak gate power Maximum average gate power Max. peak positive gate current Max. peak positive gate voltage Max. peak negative gate voltage Maximum DC gate current required to trigger Maximum gate voltage required to trigger ST2600C..R 150 10 30 30 0.25 400 Units W A V V mA Conditions t = 100µs p Anode positive with respect to cathode Anode positive with respect to cathode Anode negative with respect to cathode TC = 25°C, VDRM = 5V TC = 25°C, VDRM = 5V 4 V 23 VGD DC gate voltage not to trigger 0.25 V TC = 125°C Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Thermal and Mechanical Specification Parameter TJ max. Max. operating temperature T stg ST2600C..R 125 -55 to 125 0.019 0.0095 0.004 0.002 43000 (4400) 1600 (R-PUK) Units °C Conditions On-state (conducting) Max. storage temperature range Thermal resistance, junction to case RthJ-C K/W K/W N (Kg) g DC operation single side cooled DC operation double side cooled Single side cooled Double side cooled Clamping force 43KN with mounting compound Rth(C-h) Thermal resistance, case to heatsink F wt Mounting force ± 10% Approximate weight Case style See Outline Table ∆RthJ-C Conduction (The following table shows the increment of thermal resistence RthJ-C when devices operate at different conduction angles than DC) Conduction angle 180° 120° 60° Single side 0.0010 0.0017 0.0044 Double side 0.0010 0.0017 0.0044 Units K/W Conditions TJ = TJ max. D-421 3333 To Order Previous Datasheet Index Next Data Sheet ST2600C..R Series Ordering Information Table Device Code ST 260 1.


ST26C31 ST2600C UDN2544


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)