2 Channel Class AB Audio Power Amplifier
Ordering number : ENN7067
w discrete component power amplifier circuits that have
a D . Overview w The STK402-000 seri...
Description
Ordering number : ENN7067
w discrete component power amplifier circuits that have
a D . Overview w The STK402-000 series products are audio power w amplifier hybrid ICs that consist of optimally-designed
been miniaturized using SANYO's unique insulated metal substrate technology (IMST). SANYO has adopted a new low thermal resistance substrate in these products to reduce the package size by about 60% as compared to the earlier SANYO STK407-000 series.
S a t
e e h
U 4 t
m o .c
Thick-Film Hybrid IC
STK402-120
Two-Channel Class AB Audio Power Amplifier IC 80 W + 80 W
Package Dimensions
unit: mm 4190-SIP15
[STK402-120]
59.2 52.0
16.5
21.0
31.0
Features
Series of pin compatible power amplifiers ranging from 20 W × 2 channels to 120 W × 2 channels (10%/1 kHz) devices. The same printed circuit board can be used depending on the output power grade. The pin arrangement is compatible with that of the 3channel STK402-200 series. This means that 3-channel printed circuit boards can also be used for 2-channel products. Miniature packages — 15 W/ch to 40 W/ch (THD = 0.4%, f = 20 Hz to 20 kHz); 46.6 mm × 25.5 mm × 8.5 mm * — 50 W/ch to 80 W/ch (THD = 0.4%, f = 20 Hz to 20 kHz); 59.2 mm × 31.0 mm × 8.5 mm * *: Not including the pins. Output load impedance: RL = 6 Ω Allowable load shorted time: 0.3 seconds Supports the use of standby, muting, and load shorting protection circuits.
ø3.6
w
w
w
t a .D
S a
e h
(12)
U 4 t e
1 15 2.0 14X2=28
.c
m o
4.0 1.0
8.5
...
Similar Datasheet