VCC1 series
1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
Features
• CMOS output • Output frequencies to 190 MHz • Low jitter,...
VCC1 series
1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
Features
CMOS output Output frequencies to 190 MHz Low jitter, Fundamental or 3rd OT Crystal Tristate output for board test and debug -10/70 or –40/85 °C operating temperature Gold over nickel contact pads
Hermetically sealed ceramic SMD package
The VCC1 Crystal Oscillator
Product is compliant to RoHS directive and fully compatible with lead free assembly
Applications
SONET/SDH/DWDM Ethernet, Gigabit Ethernet Storage Area Network
Digital Video Broadband Access Microprocessors/DSP/FPGA
Description
Vectron’s VCC1 Crystal Oscillator (XO) is quartz stabilized square wave generator with a CMOS output, operating off either a 1.8, 2.5, 3.3 or a 5.0 volt supply.
fo
Output Buffer / Disable
The VCC1 is uses fundamental or 3rd overtone crystals resulting in low jitter performance, typically 0.5pS rms in the 12 kHz to 20MHz band. Also a monolithic IC, which improves reliability and reduces cost, is hermitically sealed.
Vectron International 267 Lowell Road, Hudson NH 03051
Tel: 1-88-VECTRON-1
e-mail:
[email protected]
Performance Characteristics
Table 1. Electrical Performance, 5V option Parameter Symbol Frequency fO 1 Operating Supply Voltage VDD Absolute Maximum Supply Voltage Supply Current, Output Enabled IDD <1.5 MHz 1.5 to 20 MHz 20.01 to 50 MHz 50.00 to 85 MHz 85.01 to 125 MHz Supply Current, Out disabled IDD Output Logic Levels Output Logic High2 VOH Output Logic Low2 VOL Output Logic High...
