2.5 and 3.3 Volt LVPECL Crystal Oscillator
VCC6-Q/R Series
2.5 and 3.3 volt LVPECL Crystal Oscillator
Features
• 2.5 or 3.3V LVPECL • 3rd Overtone Crystal for bes...
Description
VCC6-Q/R Series
2.5 and 3.3 volt LVPECL Crystal Oscillator
Features
2.5 or 3.3V LVPECL 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 pS rms, 12kHz to 20MHz Enable/Disable for test and board debug -10/70 or –40/85 °C operating temperature
Hermetically sealed ceramic SMD package
Product is compliant to RoHS directive
The VCC6 Crystal Oscillator
Applications
SONET/SDH/DWDM Fiber Channel Enable/Disable Ethernet, Gigabit Ethernet Storage Area Network
Digital Video Broadband Access
OUT OUT
Output Buffer / Disable
Description
Vectron’s VCC6 Crystal Oscillator (XO) is quartz stabilized square wave generator with a LV-PECL output, operating off a 3.3 volt supply. The VCC6 is uses 3rd overtone crystals for frequencies under 200MHz, resulting in low jitter performance, typically 0.5pS rms in the 12 kHz to 20MHz band.
Vectron International 267 Lowell Road, Hudson NH 03051
Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-Q/R Series, 2.5 and 3.3v PECL Crystal Oscillator
Performance Characteristics
Table 1. Electrical Performance Parameter Frequency Supply Voltage 1, 3.3V Q option 2.5V R option Supply Current Output Logic Levels, 0/70°C Output Logic High2 Output Logic Low2 Output Logic Levels, -40/85°C Output Logic High2 Output Logic Low2 Transition Times Rise Time2 Fall Time2 Symmetry or Duty Cycle3 Operating temperature (ordering option) Stability (ordering option)4 Jitter, 12kHz to 20MHz 5 Cycle to ...
Similar Datasheet