T6963C

T6963C TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC T6963C DOT MATRIX LCD CONTROLLER LSI The T6963C is an LCD controller designed to be used with LCD control driver LSIs and data display memories. The device has an 8−bit parallel data bus and control lines for reading or writing through an MPU interface. It can be directly connected to a TMPZ−80. It has a 128−word character generator ROM which can control an external display RAM of up to 64 Kbytes. Allocation of text, graphics and external character generator RAM can be made easily and the display window can be moved freely within the allocated memory range. The device supports a very broad range of LCD formats by allowing selection of different combinations via a set of programmable inputs. It can be used in text, graphic and combination text−and−graphic modes, and includes various attribute functions. Weight: 1.2 g (typ.) Features l Display format (pin−selectable) Columns : 32, 40, 64, 80 Lines : 2, 4, 6, 8, 10, 12, 14, 16, 20, 24, 28, 32 The combination of number of columns and number of lines must not cause the frequency to exceed 5.5 MHz. (See Fig. 2) l Character font (pinselectable) Horizontal dots : 5, 6, 7, 8 Vertical dots : 8 (fixed) It is necessary to set a character font in Graphic mode just as in Text mode. The oscillation frequency does not change with the font selection. l Display duty : 1 / 16 to 1 / 128 l A 128−word character generator ROM (code 0101) T6963C−0101 is built in as standard. l Ext...