MULTIPLE RS-232 DRIVERS AND RECEIVERS
ST75285
MULTIPLE RS-232 DRIVERS AND RECEIVERS
s
s
s
MEETS AND EXCEEDS THE REQUIREMENTS OF EIA/TIA-232-E AND ITUV.28 S...
Description
ST75285
MULTIPLE RS-232 DRIVERS AND RECEIVERS
s
s
s
MEETS AND EXCEEDS THE REQUIREMENTS OF EIA/TIA-232-E AND ITUV.28 STANDARD SINGLE CHIP WITH EASY INTERFACE BETWEEN UART AND SERIAL PORT CONNECTOR OF IBM PC/ATTM AND COMPATIBLES DESIGNED TO SUPPORT DATA RATES UP TO 120 Kbps
TSSOP
DESCRIPTION The ST75285 contains six drivers and ten receivers. The pinout matches the DB9S connector design in order to decrease the part count, reduce the board space required and allow easy interconnection of the UART and serial port connector of IBM PC/ATTM and compatibles. The bipolar circuits and processing of the ST75285 provides a rugged low-cost solution for this function at the expense of quiescent power and external passive components relative to the ST75C185. The ST75285 complies with the requirements of the EIA/TIA 232-E and ITU (formally CCITT) v.28 standards. These standards are for data interchange between a host computer and ORDERING CODES
Type ST75285CTR Temperature Range 0 to 70 °C Package
peripheral at signalling rates up to 20k-bits/s. The switching speeds of the ST75285 are fast enough to support rates up to 120K-bits/s with lower capacitive loads (shorter cables). Interoperability at the higher signalling rates cannot be assured unless the designer has design control of the cable and the interface circuits at the both ends. For interoperability at signalling rates to 120 K-bits/s, use of EIA/ITA-423-B (ITU v.10) and EIA/ ITA-422-B (ITU v.11) standards are recommended. It all...
Similar Datasheet