MAX355

19-0389; Rev. 2; 9/96 Fault-Protected Analog Multiplexers _______________General Description The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and fault conditions. The MAX354/MAX355 also protect sensitive circuit components against voltages near or beyond the normal supplies. The MAX354 single 8-channel mux and the MAX355 dual 4-channel mux protect analog signals while operating from a single 4.5V to 36V supply or ±4.5V to ±18V dual supplies. These muxes have 350Ω on-resistance and can be used for demultiplexing as well as multiplexing. Input leakage current is less than 0.5nA at +25°C and less than 5nA at +85°C. All digital inputs have 0.8V and 2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility without pull-up resistors. Break-before-make operation is guaranteed and power consumption is less than 1.5mW. ____________________________Features o 350Ω Max On-Resistance o Improved 2nd Source for MAX358/MAX359 and DG458/DG459 o Pin Compatible with ADG508F/ADG509F o All Switches Off with Supplies Off o On Switch Turns Off with Overvoltage o Output Clamps at 1.5V Below Supply Rails o 0.5nA Max Input Leakage at +25°C (5nA at +85°C) o No Power-Up Sequencing Required o TTL and CMOS-Logic Compatibility MAX354/MAX355 ______________Ordering Information PART MAX354CPE MAX354CWE MAX354C/D MAX354EPE MAX354E...