SP8715IGMPAS

SP8715 SP8715 1100MHz Very Low Current Multi-Modulus Divider DS3830 Issue 4.2 September 1999 Features Odering Information G G G G G G G Operation to 1100MHz Very Low Power Single Supply Operation 2.7V to 5.25V Power Down Facility for Battery Economy Latched Modulus Control Input Push Pull Output Drive ESD Protection on All Pins† SP8715/IG/MPAS Industrial Temperature Range Miniature Plastic SOIC Package SP8715/IG/MPAC As Above supplied on Tape and Reel Description Applications G G G Cellular Telephones Cordless Telephones Mobile Radio † The SP8715 is a switchable divide by 64/65, 128/129 programmable divider which is guaranteed to operate up to 1100MHz. It will operate from a supply of 2.7V to 5.25V and requires typically 3.6mA (including the output current). It also features a power down facility for battery economy. The RF inputs are internally biased and should be capacitively coupled to the signal source. The output is designed to interface with CMOS synthesisers. ESD precautions must be observed V CK 6 MC D 2 Q CC D TYPE BIAS 7 POWER DOWN 3 RS V CC 250K 5 V EE CONTROL LOGIC NOMINAL RF INPUT (CLOCK) 1 DIVIDE BY 4/5 8 V DIVIDE BY 16 / 32 4 OUTPUT EE Figure 1 Block Diagram 1 SP8715 MP8 Figure 2 Pin Connections Absolute Maximum Ratings Supply voltage (VEE=0V) (note 1) -0.5V to 7V Control and RF inputs, RF output (VEE =0V) (note 1)-0.5V to VCC+0.5V RF input current (note 1) 10mA Operating temperature -40°C to +85°C Storage temperature range -55°C...