200mA Charge Pump Inverter or Doubler
®
SP6660
200mA Charge Pump Inverter or Doubler
s Inverts or Doubles Input Supply Voltage s 93% Power Efficiency at 3.6...
Description
®
SP6660
200mA Charge Pump Inverter or Doubler
s Inverts or Doubles Input Supply Voltage s 93% Power Efficiency at 3.6V s 10kHz/80kHz Selectable Oscillator s External Oscillator up to 700KHz s 5Ω Output Resistance at 3.6V s Low Voltage Battery Operation s Ideal for 3.6V Lithium Ion Battery s High Output Current – 200mA s Pin-Compatible High-Current Upgrade of the ICL7660 and 660 Industry Standard s Smallest Package Available for the 660 Industry Standard – 8pin µSOIC
DESCRIPTION The SP6660 is a CMOS DC-DC Monolithic Voltage Converter that can be implemented as a Voltage Inverter or a Positive Voltage Doubler. As a Voltage Inverter, a -1.5V to -4.25V output can be converted from a +1.5V to +4.25V input. As a Voltage Doubler, the SP6660 can provide a +8.0V output at 100mA from a +4.25V input. The SP6660 is ideal for both battery-powered and board level voltage conversion applications with a typical operating current of 400µA and a high efficiency (>90%) over most of its load-current range. Typical end products for this device are operational amplifier and interface power supplies, medical instruments, and handheld and laptop computers. The SP6660 is available in 8-pin DIP, SOIC, and µSOIC packages.
TYPICAL CIRCUIT: VOLTAGE INVERTER
+VIN +1.5V to +4.25V TYPICAL CIRCUIT: VOLTAGE DOUBLER
FC CAP+ GND C1 1µF to 150µF CAP-
1
+V 8
+VIN +1.5V to +4.25V
FC 1 CAP+ GND +V 8
2 3
SP6660
7 LV 6
OSC
2 3
DOUBLE VOLTAGE OUTPUT
SP6660
7 LV
OSC
C2 1µF to 150µF
4
5
OUT
NEGATI...
Similar Datasheet