WAN Multi-Mode Serial Transceiver
®
SP526 WAN Multi-Mode Serial Transceiver
+5V
1.0µF
1.0µF
22 31
VCC 1.0µF
21 C1+ 17 C1– 19 C2+ 16 C2–
VCC VDD VSS
...
Description
®
SP526 WAN Multi-Mode Serial Transceiver
+5V
1.0µF
1.0µF
22 31
VCC 1.0µF
21 C1+ 17 C1– 19 C2+ 16 C2–
VCC VDD VSS
20 15
Now Available in Lead Free Packaging
1.0µF
SP526
1.0µF
8 T1IN
12 ENT1 7 T2IN 11 ENT2 6 T3IN 10 ENT3 5 T4IN 9 ENT4 35 R1OUT 4 ENR1 34 R2OUT 3 ENR2 33 R3OUT 2 ENR3 32 R4OUT
T1
25 T1OUTA 24 T1OUTB
T2
27 T2OUTA 26 T2OUTB
T3
29 T3OUTA 28 T3OUTB
T4
30 T4OUT
R1
43 R1INA 42 R1INB
R2
41 R2INA 40 R2INB
R3
39 R3INA 38 R3INB
R4
37 R4INA 36 R4INB
1 ENR4
14 D0 GND 18 GND 23 GND 44 13 D1
The SP526 is a monolithic device that supports three (3) physical layer serial interface standards. The SP526 is fabricated using a low power BiCMOS process technology, and incorporates four (4) drivers and four (4) receivers can be configured via software for the selected interface modes at any time. The SP526 includes tri-state ability for the driver and receiver outputs through separate enable lines. A shutdown mode is also included through the mode select pins for power savings. When mated with the SP322 V.11/V.35 Programmable Transceiver, the SP526 provides the four (4) channels needed for handshaking/control lines such as CTS, RTS, etc. The two transceiver ICs are an ideal solution for WAN serial ports in networking equipment such as routers, DSU/CSU's, and other access devices.
Rev: B Date:7/7/04
SP526 Multi–Mode Serial Transceiver
1
ENT1 D1 D0 VSS C2C1GND C2+ VDD C1+ VCC
12 13 14 15 16 17 18 19 20 21 22
■ Low-Cost Programmable Serial Transceiver ■...
Similar Datasheet