DG180/181/182
Vishay Siliconix
High-Speed Drivers with Dual SPST JFET Switches
FEATURES
D Constant On-Resistance Over E...
DG180/181/182
Vishay Siliconix
High-Speed Drivers with Dual SPST JFET Switches
FEATURES
D Constant On-Resistance Over Entire Analog Range D Low Leakage D Low Crosstalk D Rad Hardness
BENEFITS
D D D D D Low Distortion Eliminates Large Signal Errors High Precision High Bandwidth Capability Fault Protection
APPLICATIONS
D D D D D Audio Switching Video Switching Sample/Hold Guidance and Control Systems Aerospace
DESCRIPTION
The DG180/181/182 are precision dual single-pole, single-throw (SPST) analog switches designed to provide accurate switching of video and audio signals. This series is ideally suited for applications requiring a constant on-resistance over the entire analog range. on-resistance include audio switching, video switching, and data acquisition.
The major difference in the devices is the on-resistance (DG180—10 W , DG181—30 W , DG182—75 W). Reduced errors are achieved through low leakage current (ID(on) < 2 nA). Applications which benefit from the flat JFET
To achieve fast and accurate switch performance, each device comprises four n-channel JFET
transistors and a TTL compatible bipolar driver. In the on state, each switch conducts current equally well in either direction. In the off condition, the switches will block up to 20 V peak-to-peak, with feedthrough of less than –60 dB at 10 MHz.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
S1 D1 NC NC IN1 V+ VL
1 2 3 4 5 6 7 Dual-In-Line Top View
14 13 12 11 10 9 8
S2 D2 NC NC IN2 V– VR S1 D1 NC NC IN1 V+ VL...