DFC10U

DFC10 SERIES DUAL OUTPUT DESCRIPTION The dual output DFC10 Series provides power solutions to meet commercial and industrial requirements. With power densities above 11 watts per cubic inch (0.67 watts per cm3), overcurrent protection, and five sided shielded case, the DFC10 meets rigorous needs in an industry standard case size. The 120KHz operating frequency of the DFC10 Series allows an increased power density while including adequate heat sinking and input/output filtering. This eliminates the need for external components in most applications. Full overload protection is provided by pulse-by-pulse current limiting on models with 48V input. FEATURES High Power Density, up to 11 Watts per Cubic Inch Efficiencies to 79% Fully Isolated, Fully Filtered Design Greater than 700V Isolation Overcurrent Protection Five-Side Shielded Copper Case Ultra Wide Range Input (4:1) BOTTOM VIEW 2.02 (51.31) 0.300 (7.62) 0.000 0.100 (2.54) 0.200 (5.08) 0.500 (12.70) 0.61 (15.5) 0.61 (15.5) 0.000 1 4 2 5 3 SIDE VIEW 0.040 (1.02) DIA TYP 1.02 (25.91) 0.800 (20.32) Mechanical tolerances unless otherwise noted: X.XX dimensions: ±0.03 inches X.XXX dimensions: ±0.005 inches NOTES (1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted. Refer to the Technical Reference Section for the definition of terms, measurement circuits and other information. Case is tied to the COMMON output pin. The functional temperature range is intende...