DFA20E12S3.3

DFA20 SERIES SINGLE OUTPUT DESCRIPTION The compact DFA20 Series provides power densities up to 11 watts per cubic inch (0.67 watts per cm3). Ideal for battery operated industrial, medical control and remote data collection systems, this converter has fully filtered inputs and outputs. Complete overload protection with independent pulse-by-pulse current limiting and an overtemperature shutdown ensures reliable system operation. The output of the converter is electrically isolated, thereby allowing the output to be configured as a positive or negative output voltage. FEATURES Remote ON/OFF and TRIM Overcurrent Protection and Thermal Shutdown Efficiencies to 83% 700V Isolation, Up to 1544V on 48V Converters Power Density up to 11 Watts per Cubic Inch Five-Side Shielded Case Extended Range Input (2:1) BOTTOM VIEW 2.02 (51.31) SIDE VIEW 0.040 (1.02) DIA 6 PLACES 0.700 (17.78) 0.600 (15.24) 0.400 (10.16) 0.300 (7.62) 0.000 0.100 (2.54) 0.51 (13.0) 5 1 2 6 2.02 (51.31) 3 7 0.25 (6.35) 0.11 (2.8) 0.000 1.800 (45.72) Mechanical tolerances unless otherwise noted: X.XX dimensions: ±0.020 inches X.XXX dimensions: ±0.005 inches NOTES (1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted. Refer to the Technical Reference Section for the definition of terms, measurement circuits and other information. (2) The Case is tied to the -Input, Pin 2. (3) The functional temperature range is intended to give an additional d...