Full Duplex RS-485 Transceivers
®
SP1490E/SP1491E
Full Duplex RS-485 Transceivers
FEATURES
■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable (SP...
Description
®
SP1490E/SP1491E
Full Duplex RS-485 Transceivers
FEATURES
■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable (SP1491E)
■ RS-485 and RS-422 Drivers/Receivers
■ Pin Compatible with SN75179 (SP1490E)
■ Pin Compatible with SN75180 (SP1491E)
■ Improved ESD Specifications ±15kV Human Body Model ±15kV IEC1000-4-2 Air Discharge ±8kV IEC1000-4-2 Contact Discharge
VCC 1 RO 2 DI 3
GND 4
8A
SP1490E
7B
8 Pin - nSOIC
6Z
5Y
APPLICATIONS ■ Industial Networks ■ Telecom ■ Motor Control ■ HVAC/ Building Control
DESCRIPTION
The SP1490E is a low power differential line driver/receiver meeting RS-485 and RS-422 standards up to 20Mbps. The SP1491E is identical to the SP1490E with the addition of driver and receiver tri-state enable lines. Both products feature ±200mV receiver input sensitivity, over wide common mode range. The SP1490E is available in 8-pin plastic DIP and 8-pin NSOIC packages for operation over the commercial and industrial temperature ranges. The SP1491E is available in 14-pin DIP and 14-pin NSOIC packages for operation over the commercial and industrial temperature ranges.
BLOCK DIAGRAM
Vcc 1
RO 2
R
DI 3
D
GND 4
NC 1
8A
7B
RO 2
R
REB 3
6Z DE 4
5Y
DI 5
D
GND 6 GND 7
14 Vcc 13 NC 12 A 11 B
10 Z 9Y 8 NC
SP1490E
SP1491E
Date: 5/11/05
SP1490E/1491E Full Duplex RS-485 Transceivers
1
© Copyright 2004 Sipex Corporation
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these ratings or any other above...
Similar Datasheet