Dual 4-input NAND 30 ohm line driver
INTEGRATED CIRCUITS
74F3040 Dual 4-input NAND 30 Ω line driver
Product specification IC15 Data Handbook 1990 Jan 29
Ph...
Description
INTEGRATED CIRCUITS
74F3040 Dual 4-input NAND 30 Ω line driver
Product specification IC15 Data Handbook 1990 Jan 29
Philips Semiconductors
Philips Semiconductors
Product specification
Dual 4-input NAND 30Ω line driver
74F3040
FEATURES
30Ω line driver 160mA output drive capability in the Low state 67mA output drive capability in the High state High speed Facilitates incident wave switching 3nh lead inductance each on VCC and GND when both side pins
are used
PIN CONFIGURATION
D0a D0b Q0 GND GND Q1 D1a D1b 1 2 3 4 5 6 7 8 16 15 14 13 12 11 NC D0d D0c VCC VCC D1d
10 D1c 9 NC
DESCRIPTION
The 74F3040 is a high current Line Driver composed of two 4-input NAND gates. It has been designed to deal with the transmission line effects of PC boards which appear when fast edge rates are used. The drive capability of the 74F3040 is 67mA source and 160mA sink with a VCC as low as 4.5V. This guarantees incident wave switching with VOH not less than 2.0V and VOL not more than 0.8V while driving impedances as low as 30Ω. This is applicable with any combination of outputs using continuous duty. The propagation delay of the part is minimally affected by reflections when terminated only by the TTL inputs of other devices. Performance may be improved by full or partial line termination. TYPE 74F3040 TYPICAL PROPAGATION DELAY 2.0ns
SF01362
TYPICAL SUPPLY CURRENT (TOTAL) 10mA
ORDERING INFORMATION
DESCRIPTION 16-pin Plastic DIP 16-pin Plastic SOL COMMERCIAL RANGE VCC = 5V ±10%...
Similar Datasheet